Operation Manual
POWX204 EN
Copyright © 2015 VARO P a g e | 11 www.varo.com
11 TECHNICAL DATA
Voltage / frequency
230-240V ~50Hz
Power input
1500W
No load speed
9000 min
-1
Cuts / min :
18000
blade size :
210 x 16,5 x 1,5mm (2pcs)
jointer table size :
740 x 213mm
planer table size :
270 x 204mm
Dimensions of parallel guide
530x105 mm
Incline of parallel guide:
from 0° to 45°
feeding speed :
6m/min
max planing width :
204mm
planing height / depth :
5 - 120mm
Max planing depth :
jointer :
0-3mm
planer :
0-2mm
net weight :
26.5 kg
12 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
93 dB(A)
Acoustic power level LwA
106 dB(A)
ATTENTION! Wear hearing protection when sound pressure is
over 85 dB(A).
13 SERVICE DEPARTMENT
Damaged switches must be replaced by our after-sales service department.
If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
14 STORAGE
Thoroughly clean the whole machine and its accessories.
Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
Don’t keep it in plastic bags to avoid humidity build-up.
15 TROUBLE SHOOTING
PROBLEM
ACTION
The machine does not start
1)Check that it is properly plugged into the outlet.
2) Make sure that the chip extractor is correctly positioned
The machine stops itself
1) Press the Reset button and wait several minutes (thermal
breaker).
2) Check that the chip extraction ports are not obstructed.