Operation Manual

POWX354 EN
Copyright © 2016 VARO P a g e | 8 www.varo.com
Spray jet pulsates
Coating material in container running
out
Air filter heavily soiled
Refill
Change
Coating material
causes "paint tears"
Too much coating material applied.
Turn material volume
adjusting screw to the
left (-)
Too much fog of
coating material
(Overspray)
Distance to the object too large
Too much coating material applied
Reduce distance Turn
material volume
adjusting screw to the
left (-)
Paint in the
ventilating hose
Diaphragm soiled
Diaphragm defective
Clean the diaphragm
Replace the diaphragm
9 TECHNICAL SPECIFICATIONS
Rated Power
500 W
Rated voltage
220-240 V
Rated frequency
50 Hz
Carbon brush motor
Yes
Diameter nozzle
2.6 mm
Adjustable nozzle
Yes
Flow speed
900g/min
Max viscosity
100 din/sec
Cable length
2 m
Tank capacity
0.8 l
Adjustable paint flow control
Yes
Easy cleaning
Yes
Spray patterns
3
Round spray pattern
Yes
Horizontal spray pattern
yes
Vertical spray pattern
Yes
Quick change filter
Yes
Quick release
Yes
Soft grip
Yes
10 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
82 dB(A)
Acoustic power level LwA
93 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
<2.5 m/s²
K = 1.5 m/s²