Operation Manual

POWX371LI EN
Copyright © 2015 VARO P a g e | 5 www.varo.com
 The product should be stored out of reach of children.
 Check rated voltage on the unit matches that of your power supply.
 The unit will not function if the lithium battery is not fully charged.
 Do not excessively distort or twist the power cord.
 Do not place heavy objects on the power cord.
 Do not let the power cord contact with the surfaces of hot objects or sharp objects.
 Do not unplug the power plug from the socket by pulling the power cord.
 Do not touch power plug or the machine with wet hands. Frequently clean the dust on the
plug with dry cotton cloth.
 If the power cord is damaged, it must be replaced by manufacturer or a similar qualified
person to avoid a hazard.
 Do not insert objects into the air vents.
 Do not spray jet into eyes.
 Do not direct the spray jet directly on equipment containing electrical components, such as
the interior of ovens.
 Test in an inconspicuous area before using this unit on sensitive (high sheen) surfaces.
 Do not insert conductive objects (such as screwdrivers or similar) into the charger plug.
 Only use and store the charger in dry rooms with ambient temperature of 5-40°C (41-
104°F).
 Never touch the mains plug with wet hands.
 Do not open the battery.
 Do not expose the battery to heat, fire or prolonged periods of direct sunlight.
7 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND
CHARGERS
7.1 Batteries
 Never attempt to open for any reason.
 Do not store in locations where the temperature may exceed 40 °C.
 Charge only at ambient temperatures between 4 °C and 40 °C.
 Charge only using the charger provided with the tool.
 When disposing of batteries, follow the instructions given in the section “Protecting the
environment”.
 Do not cause short circuits. If connection is made between the positive (+) and negative (-)
terminal directly or via accidental contact with metallic objects, the battery is short circuited
and an intense current will flow causing heat generation which may lead to casing rupture
or fire.
 Do not heat. If batteries are heated to above 100 °C, sealing and insulating separators
and other polymer components may be damaged resulting in electrolyte leakage and/or
internal short circuiting leading to heat generation causing rupture or file. Moreover do not
dispose of the batteries in fire, explosion and/or intense burning may result.
 Under extreme conditions, battery leakage may occur. When you notice liquid on the
battery, proceed as follows:
 Carefully wipe the liquid off using a cloth. Avoid skin contact.
 In case of skin or eye contact, follow the instructions below:
 Immediately rinse with water. Neutralize with a mild acid such as lemon juice or
vinegar.
 In case of eye contact, rinse abundantly with clean water for at least 10 minutes.
Consult a physician.
Fire hazard! Avoid short-circuiting the contacts of a detached battery. Do
not incinerate the battery.