Operation Manual

ManualsBrandsPowerplus ManualsToolsPOWXG2061

POWXG2061 EN

1 APPLICATION ................................................................................... 3

2 DESCRIPTION (FIG. A) ..................................................................... 3

3 PACKAGE CONTENT LIST .............................................................. 3

4 SYMBOLS .......................................................................................... 4

5 GENERAL SAFETY WARNINGS ...................................................... 4

5.1 Work area .................................................................................................................. 4

5.2 Personal safety ......................................................................................................... 5

5.3 Engine tool use and care .......................................................................................... 5

5.4 Service ....................................................................................................................... 5

6 ADDITIONAL SAFETY INSTRUCTIONS FOR PETROL HEDGE

TRIMMERS......................................................................................... 5

7 SAFETY WARNINGS GASOLINE .................................................... 6

8 MACHINE′S SAFETY EQUIPMENT .................................................. 6

8.1 Throttle lockout ......................................................................................................... 6

8.2 Engine switch (Fig. 5) ............................................................................................... 7

8.3 Vibration damping system (Fig. 6) ........................................................................... 7

8.4 Quick release ............................................................................................................. 7

8.5 Muffler ........................................................................................................................ 7

9 CUTTING EQUIPMENT (FIG. 7) ........................................................ 7

10 OPERATING INSTRUCTIONS .......................................................... 8

10.1 Prepare the machine ................................................................................................. 8

10.1.1 Assembling the Front handle ....................................................................................... 8

10.1.2 Connecting the tube (Fig. 10) ...................................................................................... 8

10.1.3 Fitting blades............................................................................................................... 8

10.1.4 Fitting cutting head (Hedge trimmer) ........................................................................... 8

10.1.5 Adjusting the harness (Fig. 13) .................................................................................... 8

10.2 Fuel handling ............................................................................................................. 9

10.2.1 Fuel safety .................................................................................................................. 9

10.2.2 Transport and storage ................................................................................................. 9

10.2.3 Fuel ............................................................................................................................. 9

Summary of content (16 pages)

PAGE 1
POWXG2061 EN 1 APPLICATION ................................................................................... 3 2 DESCRIPTION (FIG. A) ..................................................................... 3 3 PACKAGE CONTENT LIST .............................................................. 3 4 SYMBOLS .......................................................................................... 4 5 GENERAL SAFETY WARNINGS ...................................................... 4 5.1 Work area ...
PAGE 2
POWXG2061 EN 10.2.4 Petrol .......................................................................................................................... 9 10.2.5 Two-stroke oil............................................................................................................ 10 10.2.6 Mixing ....................................................................................................................... 10 10.2.7 Fuelling ........................................................................
PAGE 3
EN POWXG2061 LONG REACH HEDGE TRIMMER 25.4CC POWXG2061 1 APPLICATION The hedge trimmer should only be used for trimming hedges, bushes and shrubs. Other use of the trimmer, not included in this manual, could damage the trimmer or seriously injure the operator and is therefore expressively excluded from the application range. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety.
PAGE 4
EN POWXG2061 4 SYMBOLS In this manual and/or on the machine the following symbols are used: Denotes risk of personal injury or damage to the tool. Read instructions carefully. Wear safety glasses and ear protection. Wear gloves. Wearing of protective shoes advised. Never operate the machine in the rain or in damp or wet condition. Moisture is a shock hazard. Warning! Flying objects. Don’t use the trimmer in any position that causes any part to come within 10 m of overhead electrical line.
PAGE 5
EN POWXG2061  Keep children and bystanders away while operating a tool. Distractions can cause you to lose control. 5.2 Personal safety  Stay alert, watch what you are doing and use common sense when operating a tool. Do not use a tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating tools may result in serious personal injury.  Use safety equipment. Always wear eye protection.
PAGE 6
EN POWXG2061      7 Do not smoke while refueling. This is potentially dangerous as it may ignite the fuel and cause an explosion. Take care not to spill fuel. When refueling the hedge trimmer ensure that the motor has been switched off. Prevent the spilling of fuel as this may also ignite with the hot motor. Never refuel whilst the engine running. Be careful where you store the hedge trimmer. Store the hedge trimmer in a dry area away from flammable liquids. Keep your distance.
PAGE 7
POWXG2061  EN See instructions under the heading Start. Start the machine and apply full throttle. Release the throttle and check that the cutting attachment stops and remains at a standstill. If the cutting attachment rotates with the throttle in the idle position then the carburetor idle setting must be checked. (Fig. 4) 8.2 Engine switch (Fig. 5) Press down the “O” side of the engine switch to stop the engine.
PAGE 8
10 EN POWXG2061 OPERATING INSTRUCTIONS 10.1 10.1.1 Prepare the machine Assembling the Front handle Fit the front handle absorber (A) on the rear tube (C). While aligning the hole (B) on the front handle absorber、the position pin (F) on the barrier (E) and one position hole (D) of three on the rear handle, fit the barrier on the rear handle and insert the position pin into the position hole on the rear handle. Make sure the barrier is on the left side of the machine. (Fig.
PAGE 9
POWXG2061 10.2 10.2.1 EN Fuel handling Fuel safety Never start the machine:  If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.  If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.  If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines. 10.2.
PAGE 10
POWXG2061 10.2.5 EN Two-stroke oil For best results and performance use two-stroke engine oil, which is specially formulated for our air-cooled two-stroke engines. Never use two-stroke oil intended for water-cooled engines, sometimes referred to as outboard oil (rated TCW). Never use oil intended for four-stroke engines. A poor oil quality and/or too high oil/fuel ratio may jeopardize function and decrease the life time of catalytic converters. Petrol, litre 1 5 10 20 10.2.
PAGE 11
POWXG2061 10.3.1.1 EN Cold starting: A “cold” start of the engine means starting it after at least 5 minutes from when it was switched off or after refueling.  Starting: Ignition: Press down the “I” side of the engine switch. (Fig. 14)  Primer bulb: Press the primer bulb repeatedly until fuel begins to fill the bulb. The bulb need not be completely filled. (Fig. 15)  Choke: Set the choke knob in the choke position. (Fig.
PAGE 12
EN POWXG2061 10.4 General working instructions 10.4.1       Trimming branch or leaves with Long-reach hedge trimmer Work with a swinging action from the bottom upwards when trimming sides. (Fig. 22) Always work at full throttle. (Fig. 23) When trimming a hedge the engine should always face away from the hedge. (Fig. 23) Hold the machine as close to your body as possible to get the best balance. (Fig. 23) Make sure that the tip does not touch the ground. (Fig.
PAGE 13
Filter in fuel tank Carburetor Spark plug Cooling inlets Bevel gear Blade All accessible screws Anti-vibration elements Safety labels Muffler Copyright © 2015 VARO P a g e | 13 Monthly Weekly After each refueling stop * * If required Air filter * If problem Control handle Visual inspection (condition, wear, leaks) Clean Check operation Clean Replace Check Replace filter Check idle setting Readjust idle Readjust electrode gap Replace after 100 hours of operation Clean Fill grease Check Repair or
PAGE 14
EN POWXG2061 12 TECHNICAL DATA Rotation Speed (n) Blade Size Cylinder Capacity Engine Power Engine type Fuel tank capacity Knife distance Quick stop Low vibration system Easy start Fuel mixing ratio Shaft diameter Crank Engine Carburetor type Spark Plug Type soft grip Handle type Second handle type Shaft type Adjustable head Laser cut blade Two hand operation Double action blade E10 fuel proof Shaft length Extended shaft length 13 11000 min-1 450mm 25.4 cc 0.75 kW Powerplus 2-stroke engine 0.
PAGE 15
POWXG2061 14 What to do when… Source of problem Corrective action 1. The engine will not start or will not keep running Incorrect starting Follow the procedure instructions (see chapter 3) Dirty spark plug or Check the spark incorrect distance plug (see chapter 5) between the electrodes Air filter clogged Clean or replace the filter (see chapter 5) Contact your dealer Carburation problems 2.
PAGE 16
POWXG2061         16 EN Any transportation costs shall always be borne by the customer, unless agreed otherwise in writing. At the same time, no claim can be made on the warranty if the damage of the device is the result of negligent maintenance or overload.