User Manual

POWXG3005 EN
Copyright © 2014 VARO P a g e | 8 www.varo.com
11 TROUBLE SHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Line will not
advance
 Line is welded to itself
 Not enough line on the spool
 Line has worn too short
 Line is tangled on the spool
 Lubricate with a silicone
spray
 Replace the spool
 Remove the spool and feed
line out
 Remove line from spool and
rewind
Cutting head is
hard to turn
 Grass wrapped or built up
around head
 Clean the effected parts of
the machine
Grass continually
wraps around
the shaft and
trimmer head
assembly
 Cutting tall grass at ground
level
 Cut tall grass from the top
down
Line trimmer
stops and will not
start again
 Unit failed
 Plug is damaged
 Contact dealer to check
damage
 Check the plug
12 TECHNICAL DATA
Rated voltage
220-240~
Rated frequency
50Hz
Rated Power
550W
No load speed
9500 min
-1
Cutting width
330 mm
Line size
Φ1.4mm
Cutting system
2 lines/automatic system
Weight
2,6kg
13 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
84dB(A)
Acoustic power level LwA
96 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A).
aw (Vibration)
0.7m/s²
K = 1,5 m/s²