Operation Manual

ManualsBrandsPowerplus ManualsToolsPOWXG3025

POWXG3025 EN

1 APPLICATION ................................................................................... 3

2 DESCRIPTION (FIG. A) ..................................................................... 3

3 PACKAGE CONTENT LIST .............................................................. 3

4 SYMBOLS .......................................................................................... 4

5 GENERAL SAFETY WARNINGS ...................................................... 5

5.1 Work area .................................................................................................................. 5

5.2 Personal safety ......................................................................................................... 5

5.3 Engine tool use and care .......................................................................................... 5

5.4 Service ....................................................................................................................... 6

6 ADDITIONAL SAFETY INSTRUCTIONS FOR PETROL HEDGE

TRIMMERS......................................................................................... 6

7 SAFETY WARNINGS GASOLINE .................................................... 6

8 MACHINE′S SAFETY EQUIPMENT .................................................. 6

8.1 Throttle lockout ......................................................................................................... 7

8.2 Engine switch (Fig. 6) ............................................................................................... 7

8.3 Vibration damping system (Fig. 7) ........................................................................... 7

8.4 Quick release ............................................................................................................. 7

8.5 Muffler ........................................................................................................................ 7

9 CUTTING EQUIPMENT (CUTTING ATTACHMENT & GRASS

TRIMMER) .......................................................................................... 8

9.1 Cutting attachment ................................................................................................... 8

9.2 Sharpening grass cutters and grass blades ........................................................... 8

9.3 Trimmer head ............................................................................................................ 8

10 CUTTING EQUIPMENT (LONG REACH HEDGE TRIMMER) .......... 9

11 OPERATING INSTRUCTIONS .......................................................... 9

11.1 Prepare the machine ................................................................................................. 9

11.1.1 Assembling the Front handle ....................................................................................... 9

11.1.2 Connecting the tube (Fig. 12) ...................................................................................... 9

11.1.3 Fitting blades and trimmer heads ................................................................................ 9

11.1.4 Fitting the guard extension .......................................................................................... 9

Summary of content (20 pages)

PAGE 1
POWXG3025 EN 1 APPLICATION ................................................................................... 3 2 DESCRIPTION (FIG. A) ..................................................................... 3 3 PACKAGE CONTENT LIST .............................................................. 3 4 SYMBOLS .......................................................................................... 4 5 GENERAL SAFETY WARNINGS ...................................................... 5 5.1 Work area ...
PAGE 2
POWXG3025 EN 11.1.5 Fitting a blade guard, grass blade and grass cutter ................................................... 10 11.1.6 Fitting the trimmer guard and trimmer head (Fig. 18) ................................................. 10 11.1.7 Fitting cutting head (Hedge trimmer) (Fig. 19) ........................................................... 10 11.1.8 Adjusting the harness (Fig. 20).................................................................................. 10 11.2 Fuel handling..........
PAGE 3
EN POWXG3025 LONG REACH 3-IN-1 COMBI: BRUSH CUTTER, GRASS TRIMMER, HEDGE TRIMMER 33CC POWXG3025 1 APPLICATION This appliance is designed for the following applications:  Brush cutter (when fitted with metal circular blade): The brush cutter is intended to cut weed and climbing plants. Do not use it for other purposes, never use it for cutting wood. Never cut objects with a diameter exceeding 13 mm.
PAGE 4
EN POWXG3025 WARNING Packing materials are no toys! Children must not play with plastic bags! Danger of suffocation! LONG REACH 3-in-1 combi: brush cutter, grass trimmer, hedge trimmer 33Cc Safety blade cover Carrying belt Manual Spark plug wrench When parts are missing or damaged, please contact your dealer. 4 SYMBOLS In this manual and/or on the machine the following symbols are used: Denotes risk of personal injury or damage to the tool.
PAGE 5
POWXG3025 5 GENERAL SAFETY WARNINGS EN Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. 5.1 Work area  Keep work area clean and well lit. Cluttered and dark areas invite accidents.  Do not operate tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Tools create sparks which may ignite the dust or fumes.
PAGE 6
EN POWXG3025 5.4 Service  Have your tool serviced by a qualified person using only identical replacement parts. This will ensure that the safety of the tool is maintained. 6 ADDITIONAL SAFETY INSTRUCTIONS FOR PETROL HEDGE TRIMMERS         7 Do not operate in a hazardous location. Such areas include where there is a risk of explosion of petrol fumes, leaking gas or explosive dust. Do not operate in a confined area. Exhaust gases, smoke or fumes could reach dangerous concentrations.
PAGE 7
POWXG3025 EN 8.1 Throttle lockout  The throttle lockout is designed to prevent accidental operation of the throttle control. When you press the lock-out (A) (i.e. when you grasp the handle) it releases the throttle trigger (B). When you release the handle the throttle control and the throttle lockout both move back to their original positions. This movement is controlled by two independent return springs. This arrangement means that the throttle control is automatically locked at the idle setting. (Fig.
PAGE 8
POWXG3025 9 CUTTING EQUIPMENT (CUTTING ATTACHMENT & GRASS TRIMMER) EN This section describes how to choose and maintain your cutting equipment in order to:  Reduce the risk of blade thrust.  Obtain maximum cutting performance.  Extend the life of cutting equipment. IMPORTANT: Only use cutting attachments with the guards we recommend! See the chapter on Technical data. Refer to the instructions for the cutting attachment to check the correct way to load the cord and the correct cord diameter.
PAGE 9
EN POWXG3025 Make sure that the cutter on the trimmer guard is intact. This is used to cut the cord to the correct length. To increase the life of the cord it can be soaked in water for a couple of days. This will make the line tougher so that it lasts longer. 10 CUTTING EQUIPMENT (LONG REACH HEDGE TRIMMER) To ensure good cutting results it is important that the contact pressure between the blades is correct.
PAGE 10
POWXG3025    11.1.5  EN Hook the blade guard/combination guard onto the fitting on the shaft and secure with three bolts. (Fig. 13) Enter the guard extension guide in the slot of the combination guard. Then click the guard extension into position on the guard with some claws. (Fig. 14) The guard extension is removed easily using a screwdriver, see illustration. (Fig.
PAGE 11
POWXG3025 EN Single shoulder harness: Put on the harness. Hook the machine onto the harness support hook. Adjust the length of the harness so that the support hook is roughly level with your right hip. 11.2 11.2.1 Fuel handling Fuel safety Never start the machine:  If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.  If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel.
PAGE 12
EN POWXG3025 The lowest octane recommended is 90 (RON). If you run the engine on a lower octane grade than 90 so- called knocking can occur. This gives rise to a high engine temperature, which can result in serious engine damage. When working at continuous high revs a higher octane rating is recommended. 11.2.5 Two-stroke oil For best results and performance use two-stroke engine oil, which is specially formulated for our air-cooled two-stroke engines.
PAGE 13
EN POWXG3025      Check the blade to ensure that no cracks have formed at the bottom of the teeth or by the centre hole. The most common reason why cracks are formed is that sharp corners have been formed at the bottom of the teeth while sharpening or that the blade has been used with dull teeth. Discard a blade if cracks are found. Check that the support flange is not cracked due to fatigue or due to being tightened too much. Discard the support flange if it is cracked.
PAGE 14
POWXG3025 EN Do not put any part of your body in marked area. Contact can result in burns to the skin, or electrical shock if the spark plug cap has been damaged. Always use gloves. Do not use a machine with damaged spark plug cap. IMPORTANT If the starter rope is pulled repeatedly with the choke on, it may flood the engine and make starting difficult. If you happen to food the engine, repeat the hot start procedure a few times to eliminate any excess fuel. 11.3.2.
PAGE 15
POWXG3025 11.4.2 EN Grass clearing using a grass blade Grass blades and grass cutters must not be used on woody stems. A grass blade is used for all types of tall or coarse grass. The grass is cut down with a sideways, swinging movement, where the movement from rightto-left is the clearing stroke and the movement from left-to- right is the return stroke. Let the left-hand side of the blade (between 8 and 12 o’clock) do the cutting.
PAGE 16
EN POWXG3025 11.4.3.4 Sweeping (Fig. 32) The fan effect of the rotating cord can be used for quick and easy clearing up. Hold the cord parallel to and above the area to be swept and move the tool to and fro. When cutting and sweeping you should use full throttle to obtain the best results. 11.4.4       Trimming branch or leaves with Long-reach hedge trimmer Work with a swinging action from the bottom upwards when trimming sides. (Fig. 33) Always work at full throttle. (Fig.
PAGE 17
EN POWXG3025 Spark plug Cooling inlets Guide bar Blade All accessible screws Anti-vibration elements Safety labels Muffler Copyright © 2015 VARO P a g e | 17 Monthly Weekly After each refueling stop * If required Filter in fuel tank * If damaged Air filter * If problem Control handle Visual inspection (condition, wear, leaks) Clean Check operation Clean Replace Check Replace filter Readjust electrode gap Replace after 100 hours of operation Clean Check Repair or replace Check Repair or repl
PAGE 18
POWXG3025 13 TECHNICAL DATA Rotation Speed (n) grass trimmer Blade Size Cylinder Capacity Engine Power Cutting width grass trimmer Cutting width brush cutter Cutting width hedge trimmer Engine type Oil tank capacity Fuel tank capacity Knife distance Quick stop Thread lengthening type Spool diameter Spool length Low vibration system Easy start Heavy duty clutch Fuel mixing ratio Crank Engine Carburetor type Number of teeth/ blades soft grip Safety guard Handle type Second handle type Shaft type Adjustable he
PAGE 19
EN POWXG3025 14 NOISE Noise emission values measured according to relevant standard. (K=3) Acoustic pressure level LpA 96 dB(A) Acoustic power level LwA 110 dB(A) ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A). aw (Vibration) 3.89m/s² K = 1,5 m/s² 15 TROUBLESHOOTING What to do when…. Source of problem Corrective action 1.
PAGE 20
POWXG3025 EN 16 WARRANTY               This product is warranted for a 36-month period effective from the date of purchase by the first user. This warranty covers all material or production flaws excluding : batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of transportation.