User Manual

ManualsBrandsPowerplus ManualsPumpsPOWXG9407 SUBMERSIBLE PUMP 850W EN

POWXG9407 EN

1 APPLICATION .................................................................................. 2

2 DESCRIPTION (FIG A) .................................................................... 2

3 PACKAGE CONTENT LIST ............................................................. 2

4 SYMBOLS ........................................................................................ 2

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 3

6 BEFORE START-UP, NOTE THE FOLLOWING! ........................... 3

7 INSTALLATION ................................................................................ 3

8 SETTING TO WORK ........................................................................ 4

8.1 Setting the ON/OFF operating point....................................................................... 4

9 CLEANING AND MAINTENANCE ................................................... 4

9.1 Maintenance guidelines .......................................................................................... 4

9.2 Cleaning the impeller .............................................................................................. 5

10 TECHNICAL DATA .......................................................................... 5

11 SERVICE DEPARTMENT ................................................................ 5

12 TROUBLESHOOTING ..................................................................... 6

13 STORAGE ........................................................................................ 6

14 WARRANTY ..................................................................................... 6

15 ENVIRONMENT ............................................................................... 7

16 DECLARATION OF CONFORMITY ................................................ 7

Summary of content (7 pages)

PAGE 1
POWXG9407 EN 1 APPLICATION .................................................................................. 2 2 DESCRIPTION (FIG A) .................................................................... 2 3 PACKAGE CONTENT LIST ............................................................. 2 4 SYMBOLS ........................................................................................ 2 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 3 6 BEFORE START-UP, NOTE THE FOLLOWING! .
PAGE 2
EN POWXG9407 SUBMERSIBLE PUMP 850W POWXG9407 1 APPLICATION This pump is used primarily as cellar pump. When installed in a shaft, the pump provides protection from flooding. It is also used wherever water has to be moved from one place to another, e.g. in the home, agriculture, horticulture, plumbing and many other applications. It is not designed for commercial use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety.
PAGE 3
POWXG9407 5 GENERAL POWER TOOL SAFETY WARNINGS EN Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool.
PAGE 4
EN POWXG9407 Note! The pump shaft should have minimum dimensions of 40 x 40 x 50 cm, so that the floating switch can move freely. Mains supply Your new submersible pump is equipped with a shock-proof plug according to regulations. The pump is designed to be connected to a 230V - 50 Hz earthed socket. Make sure that the socket is sufficiently secured (min. 6 Amp.) and is in excellent condition. Introduce the plug into the socket and the pump is ready to go.
PAGE 5
EN POWXG9407 Important ! Note! Remove the mains plug before all maintenance work.      When the pump is often transported in the course of operation, it should be cleaned out with clear water after every use. In case of stationary installation, the function of the bating switch should be checked every 3 months. All fibrous particles which may have built-up inside the pump housing should be removed with a water jet. Every 3 months the shaft ground and as should be cleaned from mud.
PAGE 6
EN POWXG9407 12 TROUBLESHOOTING INCIDENTS Pump does not start No flow Pump does not switch off Insufficient flow Pump switches of after short operating period CAUSES - No mains supply - Floater does not switch - Inlet sieve is clogged - Pressure hose in bent - Floater cannot sink down REMEDIES - Check mains supply - Bring floater in a higher position - Clean inlet sieve water jet - Reset hose - Place pump properly on shaft ground - Inlet sieve is clogged - Reduced pumping capacity by dirty and abrasive
PAGE 7
EN POWXG9407    We reserve the right to reject a claim whenever the purchase cannot be verified or when it is clear that the product has not been properly maintained. (Clean ventilation slots, carbon brushes serviced regularly, etc.). Your purchase receipt must be kept as proof of date of purchase. Your appliance must be returned undismantled to your dealer in an acceptably clean state, (in its original blow-moulded case if applicable to the unit), accompanied by proof of purchase.