manual

ManualsBrandsPowerplus ManualsDo-It-Yourself toolsPOWXQ5250

POWXQ5250 EN

1 APPLICATION ................................................................................ 3

2 DESCRIPTION (FIG. 1-2) ................................................................ 3

3 PACKAGE CONTENT LIST ............................................................ 3

4 SYMBOLS ....................................................................................... 4

5 GENERAL POWER TOOL SAFETY WARNINGS ......................... 4

5.1 Working area .......................................................................................................... 4

5.2 Electrical safety ..................................................................................................... 4

5.3 Personal safety ...................................................................................................... 5

5.4 Power tool use and care ........................................................................................ 5

5.5 Service .................................................................................................................... 5

6 ADDITIONAL SAFETY INSTRUCTIONS ....................................... 5

7 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND

CHARGERS .................................................................................... 6

8 FEATURES...................................................................................... 6

8.1 Keyless chuck (12) ................................................................................................ 6

8.2 Torque adjustment ring (11) .................................................................................. 6

8.3 Forward/reverse selector (right/left rotation selector) (3) ................................... 7

8.4 Variable speed ....................................................................................................... 7

8.5 Speed selector (2) .................................................................................................. 7

9 (PRE)OPERATION .......................................................................... 7

9.1 Charging the battery pack ..................................................................................... 7

9.2 Charging indication: (Fig. 3) ................................................................................. 7

9.3 Install/remove battery pack (Fig. 4) ...................................................................... 8

9.4 Switch (Fig. 5) ........................................................................................................ 8

9.4.1 Switch lock............................................................................................................... 8

9.4.2 Direction of rotation .................................................................................................. 8

9.4.3 Variable speed ......................................................................................................... 8

9.5 Installing/removing bits (Fig. 7) ............................................................................ 8

9.6 Adjusting the torque (Fig. 8) ................................................................................. 9

9.7 Setting the impact drilling mode (Fig. 8) .............................................................. 9

9.8 Speed selector (Fig. 9) ........................................................................................... 9

Summary of content (13 pages)

PAGE 1
POWXQ5250 EN 1 APPLICATION ................................................................................ 3 2 DESCRIPTION (FIG. 1-2)................................................................ 3 3 PACKAGE CONTENT LIST............................................................ 3 4 SYMBOLS ....................................................................................... 4 5 GENERAL POWER TOOL SAFETY WARNINGS ......................... 4 5.1 Working area ...............................
PAGE 2
POWXQ5250 EN 9.9 LED light (Fig. 10) .................................................................................................. 9 9.10 Magnetic plate (Fig. 11) ......................................................................................... 9 9.11 Auxiliary handle subassembly (Fig. 12) ............................................................. 10 9.12 Depth Gauge (1) ...................................................................................................
PAGE 3
EN POWXQ5250 CORDLESS HAMMER DRILL 18V LI-ION POWXQ5250 1 APPLICATION The power tool is intended for driving and drilling through wood, metal, plastics and masonry. It is not designed for commercial use. WARNING! For your own safety, read this manual and general safety instructions carefully before using the appliance. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION (FIG. 1-2) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
PAGE 4
EN POWXQ5250 4 SYMBOLS In this manual and/or on the machine the following symbols are used: Denotes risk of personal injury or damage to the tool. Only use indoors. Read manual before use. Do not expose charger and battery pack to water. In accordance with essential requirements of the European directive(s) Do not incinerate battery pack. Class II - The machine is double insulated; earthing wire is therefore not necessary.
PAGE 5
POWXQ5250 EN 5.3 Personal safety § Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of inattention when operating a power tool may result in serious personal injury. § Use safety equipment. Always wear eye protection.
PAGE 6
EN POWXQ5250 § 7 Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND CHARGERS Batteries 1. Never attempt to open for any reason. 2. Do not store in locations where the temperature may exceed 40 °C. 3.
PAGE 7
EN POWXQ5250 8.3 Forward/reverse selector (right/left rotation selector) (3) The drill has a forward/reverse selector located above the switch trigger. § Press selector F(orward)/R(everse) on left side of machine (to the right side): drill turns left (reverse/loosen screws) § Press selector F(orward)/R(everse) on right side (to the left side): drill turns right (forward/fasten screws).
PAGE 8
EN POWXQ5250 9.3 Install/remove battery pack (Fig. 4) WARNING: Before making any adjustments ensure the drill is switched off with the reversing switch in the centre position. Hold the drill with one hand and the battery pack (6) with the other. To install: pull and slide battery pack (6) into battery port, make sure the latch on the back side of the battery snap into place and battery is secure before beginning operation.
PAGE 9
EN POWXQ5250 9.6 Adjusting the torque (Fig. 8) The torque is adjusted by rotating the torque setting ring (11); the torque is greater when the torque setting is sett on a higher position. The torque is less when the torque setting ring is set on a low position“1”denote lowest and “ ” denote highest. Torque is set by means of a torque setting according to different screw and different material, you can adjust suitable torque, if the screw is long and material is hard, you can adjust the bigger setting.
PAGE 10
EN POWXQ5250 9.11 Auxiliary handle subassembly (Fig. 12) The auxiliary handle subassembly will provide additional control, support and guidance for the drill. The handle is adjustable to any position around the 360°handle collar mount (16). Installing the auxiliary handle subassembly: Loosen the collar mount by turning the grip (17) adequately, then slide the handle over the handle collar mount on the suitable position of this tool. Finally securely tighten the grip.
PAGE 11
EN POWXQ5250 CLEANING AND MAINTENANCE 11.1 Cleaning § Keep the ventilation slots of the tool clean to prevent overheating of the engine. § Regularly clean the tool housing with a soft cloth, preferably after each use. § Keep the ventilation slots free from dust and dirt. § If the dirt does not come off use a soft cloth moistened with soapy water. § Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts. 11.
PAGE 12
EN POWXQ5250 14 SOUND EMISSION Noise emission values measured according to relevant standard. Acoustic pressure level LpA 86 dB(A) K = 3 dB(A) Acoustic power level LwA 97 dB(A) K = 3 dB(A) ATTENTION ! The sound power pressure may exceed 85 dB(A), in this case individual hearing protection must be worn. aw (Vibration) drill aw (Vibration) impact drill 2.43 m/s² 6.14 m/s² K = 1.5 m/s² K = 1.
PAGE 13
EN POWXQ5250 16 ENVIRONMENT Should your appliance need replacement after extended use, do not dispose of it with the household refuse, but in an environmentally safe way. Waste produced by electrical machine items should not be handled like normal household rubbish. Please recycle where recycle facilities exist. exis Check with your Local Authority or retailer for recycling advice. 16.1 Battery pack This product contains Li-ion. ion.