Operation Manual

ManualsBrandsPowerplus ManualsToolsPOWXQG3020

POWXQG3020 EN

1 APPLICATION 2

2 DESCRIPTION 2

3 PACKAGE CONTENT LIST 2

4 SYMBOLS 2

5 GENERAL POWER TOOL SAFETY WARNINGS 3

5.1 Work area 3

5.2 Electrical safety 3

5.3 Personal safety 3

5.4 Power tool use and care 4

5.5 Service 4

6 ADDITIONAL SAFETY WARNINGS FOR HEDGE TRIMMERS 4

7 OPERATION 5

7.1 Starting the machine 5

7.2 Rotated rear handle 5

7.3 Cutting hedge 5

8 CLEANING AND MAINTENANCE 5

9 TECHNICAL DATA 6

10 NOISE 6

11 WARRANTY 6

12 ENVIRONMENT 7

13 DECLARATION OF CONFORMITY 7

Summary of content (7 pages)

PAGE 1
EN POWXQG3020 1 APPLICATION 2 2 DESCRIPTION 2 3 PACKAGE CONTENT LIST 2 4 SYMBOLS 2 5 GENERAL POWER TOOL SAFETY WARNINGS 3 5.1 Work area 3 5.2 Electrical safety 3 5.3 Personal safety 3 5.4 Power tool use and care 4 5.5 Service 4 6 ADDITIONAL SAFETY WARNINGS FOR HEDGE TRIMMERS 4 7 OPERATION 5 7.1 Starting the machine 5 7.2 Rotated rear handle 5 7.
PAGE 2
POWXQG3020 EN HEDGE TRIMMER 710W 685MM POWXQG3020 1 APPLICATION The hedge trimmer should only be used for trimming hedges, bushes and shrubs. Other use of the trimmer, not included in this manual, could damage the trimmer or seriously injure the operator and is therefore expressively excluded from the application range. WARNING! For your own safety, read this manual and general safety instructions carefully before using the appliance.
PAGE 3
EN POWXQG3020 Never operate the machine in the rain or in damp or wet condition. Moisture is a shock hazard. Class II - The machine is double insulated; Earthing wire is therefore not necessary. Remove the plug from the mains. In accordance with essential requirements of the European directive(s). 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury.
PAGE 4
EN POWXQG3020     Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts.
PAGE 5
EN POWXQG3020    If you are interrupted when operating the trimmer, complete the process and switch off before looking up. Advice to check the hedge for foreign objects, e.g. wire fences Recommendation for the use of a residual current device 7 OPERATION 7.1 Starting the machine  Switching on: press both the trigger switch (1) and the front handle trigger (3) at the same time.  Switching off: release one of the switches.  The mechanical blade brake makes the blades stop immediately within 0.2 sec.
PAGE 6
EN POWXQG3020 9 TECHNICAL DATA Type Voltage ~Frequency Power input Blade length Cutting length Cutting capacity No load speed Weight POWXQG3020 220-240V ~50Hz 710 W 685 mm 600 mm 24 mm 3200 /min 3,2 kg 10 NOISE Noise emission values measured according to relevant standard. (K=3) Acoustic pressure level LpA 90 dB(A) Acoustic power level LwA 103 dB(A) ATTENTION! Wear over 85 dB(A).
PAGE 7
EN POWXQG3020   Your purchase receipt must be kept as proof of date of purchase. Your appliance must be returned undismantled to your dealer in an acceptably clean state, (in its original blow-moulded case if applicable to the unit), accompanied by proof of purchase. 12 ENVIRONMENT Should your appliance need replacement after extended use, do not discard it with the household rubbish but dispose of it in an environmentally safe way.