Users Manual

ManualsBrandsPOWERQI ManualsPhone accessoriesWireless Charging Power Bank

Preface

Thank you for purchasing the Shenzhen Powerqi Technology Co.Ltd products.

For optimum operation ,please read this manual carefully before use.

Product Details

Specification

. Model: FC81

.Dimensions:L158.3*W77*H17.5mm

.INput: 5V3A 9V2A

.Total:15 W Max(Multiple output),18W(Single-port output)Max

.Wireless charging Output: 5W/7.5W/10W

.USB A port output:5V3A 9V2A 12V1.5A

. USB C port output:5V3A 9V2A 12V1.5A

.Battery capacity:10000maH3.7V(37W)

.Batter charging Limited Voltage: 4.25V

.charging time:5 hours(by 5V3A power

.Service Temperature: 0℃-43℃

Summary of content (6 pages)

PAGE 1
Preface Thank you for purchasing the Shenzhen Powerqi Technology Co.Ltd products. For optimum operation ,please read this manual carefully before use. Product Details Specification . Model: FC81 .Dimensions:L158.3*W77*H17.5mm .INput: 5V3A 9V2A .Total:15 W Max(Multiple output),18W(Single-port output)Max .Wireless charging Output: 5W/7.5W/10W .USB A port output:5V3A 9V2A 12V1.5A . USB C port output:5V3A 9V2A 12V1.5A .Battery capacity:10000maH3.7V(37W) .Batter charging Limited Voltage: 4.25V .
PAGE 2
User Manual 1.Power ON .connect your device to this product and it will detect your device and power on automatically. press the power button to turn it on if this product does not power on automatically .press the power button to turn on this product before you use the wireless charging pad for charging your QIenabled device 2.Power off .if no device is connected to this product within 30 seconds or this product is under continuous low output,it will automatically turn off .
PAGE 3
.LED indicator light status CLick gently the power button to check the remaining battery The indicator lights will turn off automatically after six seconds, The LED1 will turn green when the fast charging mode is detected,when there is a green will flash quickly. 4XLEDS on: 75%-100% remaining capacity 3XLEDS on: 50%-75% remaining capacity 2XLEDS on: 25%-50% remaining capacity 1XLEDS on: 5%-25% remaining capacity 1XLEDS flash: less than 5% remaining capacity 4.
PAGE 4
The USB A port of this product can support fast charge when used in isolation,but for security purposes,this product will turn off the fast charge function and only support the ordlinary 5V output when two or more devices are charged at the same time capacity 0-25% 25-50% 50-75% 75-100% charged LED1 flash on on on on LED2 off off on on on LED3 off off off on on LED4 off off off off on 6.Low power alarm when the battery is less than 10%,the product will enter the low voltage alarm mode.
PAGE 5
Warnings .This product contains a lithium-ion battery, IT is strictly forbidden to disassemble the shell of the product to avoid any damage to the core or other danger .
PAGE 6
FCC statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.