Owner manual

SPECIFICATIONS
PIEZO SPECIFICATIONS
Existing ESP proximity showers (concealed and Hydropanel)
can now be retrofitted with Powers’ new Piezo technology.
Piezo switches feature ADA compliant activation, stainless
steel construction, water tight electronics and contain no
moving parts to wear out. Piezo switches also feature the
identical modular connectors (telephone type) found on
proximity sensors and are completely compatible with all
Powers’ existing ESP hardware. The entire retrofit operation
takes just minutes.
MODULAR
CONNECTION
THREADED
HOUSING
BUTTON
ASSEMBLY
EXISTING
POLISHED CHROME
ESCUTCHEON
Part No: 444-310A
TECHNICAL INSTRUCTIONS
Piezo Retrofit
For Existing ESP™ Proximity Showers
Form TI 444R v2
RETROFIT INSTRUCTIONS
RETROFIT KIT COMPONENTS
WARRANTY INFORMATION
• Button Material: 304 Stainless Steel.
• Potted Electronics: Waterproof.
• Connectors: Modular (Telephone Type).
• Activation Force: 10-14 ounces. ADA/barrier
free compliant.
• Cycles: Tested over 50,000,000.
• Operating Temperature: -40° F (-40° C) to 185° F
(85° C).
Requires the use of an existing brass proximity housing (see
Figure 1).
1. Remove existing proximity sensor from polished chrome
escutcheon by rotating counter-clockwise.
2. Insert button into threaded housing.
3. Screw threaded housing into existing escutcheon.
4. Important: Ensure Piezo switch sits flush front surface
of escutcheon.
Piezo retrofit kit includes:
• Piezo switch assembly with stainless steel button and
modular connector (part no. 444-260).
• Threaded brass housing.
© 2003 Powers, a Watts Industries Co.
USA Phone: [phone] • Fax [phone]
Canada Phone: [phone] • Fax [phone]
www.powerscontrols.com
Form TI 444R v2 0339 EDP #6508960 Printed in U.S.A.
Figure 1
CALIFORNIA PROPOSITION 65 WARNING
WARNING: This product contains chemicals
known to the State of California to cause cancer
and birth defects or other reproductive harm.
(California law requires this warning to be given to
customers in the State of California.)
For more information: www.wattsind.com/prop65
Powers Process Controls warrants that the equipment manufactured by it is free from defects in material and workmanship and, without
charge, equipment found to be defective in material and workmanship will be repaired, or at Seller’s option, replaced F.O.B. original point
of shipment, if written notice of failure is received by Seller within one (1) year after date of shipment, provided said equipment has been
properly installed, operated in accordance with Seller’s instructions, and provided such defects are not due to abuse or chemical decom-
position by chemical or galvanic action. This express warranty is in lieu of and excludes all other warranties, guarantees, or representa-
tions express or implied. There are no implied warranties of merchantability or of fitness for a particular purpose. The Seller assumes no
responsibility for repairs made on Seller’s equipment unless done by Seller’s authorized personnel, or by written authority from the
Seller. The Seller makes no guarantee with respect to material not manufactured by it.