User Guide

9
Set up and Programming
Unlock the system
1. To unlock the system, on the Unlock screen, enter your new passcode, and touch the Enter icon.
NOTICE
If you need to clear your entry and start again, touch the CLEAR icon. If you want to go back to
Programming Menu, touch the BACK icon.
If you did not set up your own passcode, you can enter the factory default passcode 1017.
2. When the passcode is entered, you will be directed to the liability and responsibility acceptance screen:
3. You must touch the ACCEPT icon to proceed to the Programming Menu and to use system functions.
Touching the DECLINE icon means you will not be able to change system settings and you accept all default
settings (including the outlet water temperature set point of 140° F/ 60° C) as safe and appropriate
for the water distribution system users and the facility. You will be returned to the “Programming” screen.
4. When you touch the ACCEPT icon, you will access the Programming Menu, which will appear as: