Manualshelf

Replacement Part List

ManualsBrandsPowerSharp ManualsOutdoors52 DL 14 in. Chainsaw Chain and Stone
12345678910
Specifications
Saw Chain Chainsaw Bar
Bar and Chain Combo
PowerSharp®
Pitch Gauge Bar Length Oregon®
Oregon Oregon File
Chain Kit
(in) (in) (in)
Intenz® Intenz® (in)
÷2
OregonProducts.com
+=
÷2
OregonProducts.com
+=
PowerSharp is not intended
for use on saws equipped
with in-bar tensioning
systems like Intenz.
Ensure your model has a 3/8"
Low Profile™ sprocket (other
sprockets are incompatible).
Use the bar-mount sharpener
only with PowerSharp
chain. Attempted use with
other chain will damage
the chain and sharpener.
Chain Families
Pro Series
AdvanceCut
™
FOR INFORMATION SEE PAGES IV & V
Prior to selecting replacement parts for these models, consult your owners
manual and choose the parts that match the factory pitch and gauge spec-
ifications of your saw. Bars and chains of different pitch and/or gauge are
offered for your saw but are not cross-compatible with each other
The gauge (width) of the guild bar rails on these models vary from
the factory. To insure your replacement saw chain feeds correctly
down the rail of your bar, select a chain with a matching gauge.
Choose the replacement parts in this line only if the
original guide bar on your saw has been replaced with
an Oregon replacement guide bar at this length.
4.5 mm diameter file recommended, 5/32” compatible.
13
12