INSTRUCTION MANUAL EN 21"ELECTRIC SNOW THROWER FR 21"CHASSE-NEIGE ÉLECTRIQUE ES LANZDE NIEVE ELECTRICA DE 21" Model # DB5021 Have product questions or need technical support? Please feel free to contact us! Website: www.Amerisuninc.com www.PowerSmartUSA.com Toll free: 1-800-791-9458 Mon-Fri 9-5 EST Email: support@amerisuninc.
TABLE OF CONTENTS Feature Identification ...................................................................................... 4 Safety Information........................................................................................... 5 Assembly Instructions ..................................................................................... 8 Operating Instructions ..................................................................................... 11 Troubleshooting ................................
FEATURE IDENTIFICATION 1 8 9 10 2 11 3 4 5 7 6 1 2 3 4 5 6 Auger Control Switch button Upper Tube Polarized Plug Lower Tube Wheel 7 8 9 10 11 Auger Chute Deflector Chute Chute Crank Knob 4
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. Work Area Keep work area clean and well-lit. Cluttered, dark areas invite accidents. Do not operate snow thrower in an explosive atmosphere, such as in the presence of flammable liquids, gases, or dust. Electrical appliances create sparks that may ignite the dust or fumes. Keep children, pets, and bystanders away from work area.
Body position-Maintain proper footing and balance at all times. Place heels firmly on the ground and tightly grasp the handle bar. Watch for uneven surfaces and do not over reach. In case you fall or collide with the snow thrower, inspect the unit for damage. When steeping backwards, be careful to avoid obstacles beneath your feet or behind you to avoid falling. Snow Thrower Use and Care Know your snow blower-Familiarize yourself with the main parts of your snow thrower.
PRODUCT LABELS WARNING-Read, understand and follow all safety labels and markings on the unit. CAUTION Inspect wiring, which, if damaged during shipping, may cause serious bodily injury during equipment use. If any damage is seen or suspected, do not assemble. instead, contact our customer service department at 1-800-791-9458. Handle with care during assembly so that electrical wiring does not become damaged.
ASSEMBLY INSTRUCTIONS 1 .
2. Place wheel to the axle shown below and insert the cotter pin into the hole in the axle. Bend the cotter pin and install the wheel cover. Cutter pin (2) Spacer (2) wheel (2) wheel cover L wheel cover R 3. Place upper&lower tube in the position shown below and tighten the knobs.
4. Place the Chute assembly on the rotating bracket as shown in below. 5. Use two screws to lock the chute assembly into rotation bracket.
6. Locate the three cable clips in the parts bag. Secure the power cord to the frame of the unit by clipping them onto the frame at evenly spaced intervals. Clip OPERATING INSTRUCTIONS Note: Before using this machine, make sure that the power source you will use complies with the specification’sdetailedinthismanual.Beforeinsertingtheplugintothesocket, verify that the snow throwers auger and scraper are firmly attached with screws. Perform a test run to ensure that the rotor turns freely.
2. To prevent the extension cord from disconnecting during use, tie the female end of the extension cord in to a loose knot on the top right side of the middle frame (B) before connecting to the male plug in the socket of the snow thrower. Note: The protective cover around the polarized plug is compatible with most extension cords. When choosing an extension cord be sure the female end of your cord will fit into the polarized plug. 3.
MOVING THE MACHINE AND PLOWING THE SNOW WARNING Foreign objects, such as rocks, broken glass, nails, wire, or string, can be picked up and thrown by the snow thrower, causing serious personal injury. Remove all foreign objects from the area to be plowed before operating the snow thrower. Keep the area of operation free of foreign objects that can be become thrown by the rotor blades.
CHANGING THROW DIRECTION AND THROW HEIGHT WARNING Never direct the snow discharge chute at the operator, at bystanders, at vehicles or at nearby windows. Discharge snow and foreign objects accidentally picked up by the snow thrower can cause serious damage and personal injury. Always orient the discharge chute in the opposite direction from where you, bystanders, surrounding vehicles, or windows are located. 1. The discharge chute (H) can be adjusted 180 degrees by rotating the chute crank.
DRIVE BELT REPLACEMENT WARNING Entanglement Hazard - Before performing any service procedures, make sure the snow thrower is disconnected from the power source. Note: Record component position before disassembly, to assist in reassembly. 1. Using screw driver, remove 3 screws attaching belt cover to housing. 2. Manually push the belt tension pulley up to reduce belt tension.
TROUBLESHOOTING Remedy Problem Possible Causes WARNING - Before attempting to make any inspections, repairs or adjustments, stop the snow thrower, wait for all moving parts to stop moving and carefully disconnect the AC extension cord from the power source.
CARE AND MAINTENANCE WARNING Make sure to turn off the switch and disconnect the extension cord before performing any maintenance task on your snow thrower. Run the snow thrower for a few minutes to melt away any snow on the snow thrower. Turn the snow thrower's power off. Disconnect the extension cord from the snow thrower. Examine the extension cord thoroughly for signs of wear or damage. Replace it if it is worn or damaged.
EXPLODED VIEW AND PART LIST 18
Item Stock # 1 303020282 2 Description Qty Item Stock # Hex Bolt M6x16 1 61 303130019 Tensioning Wheel Spring 1 303041009 Spring Washer 6 1 62 303042019 Flat Washer 4 3 303042009 Flat Washer 1 63 303020077 Bolt M4x10 5 4 203060009A Big Belt Wheel 1 64 303100023 Deep Groove Ball Bearing 2 5 303042069 Flat Washer 3 65 303050029 Shaft Ring 1 6 303020339 Hex Bolt M6x14 6 66 303160004 Big Gear 1 7 303100002 Deep Groove Ball Bearing 2 67 303110020 Woodru
33 303020161 Square Neck Bolt M8x25 4 93 303081213 Middle Tube 1 34 203050174 Upper Chute 1 94 303081212 Upper Tube 1 35 203010648 Chute Handle 1 95 303010358 Screw ST4.
TWO (2) YEARS LIMITED WARRANTY POWERSMART IS COMMITTED TO BUILDING TOOLS THAT ARE DEPENDABLE FOR YEARS. OUR WARRANTIES ARE CONSISTENT WITH OUR COMMITMENT AND DEDICATION TO QUALITY. TWO (2) YEARS LIMITED WARRANTY OF POWER SMART PRODUCTS FOR HOME USE. POWERSMART (“SELLER") WARRANTS TO THE ORIGINAL PURCHASER ONLY, THAT ALL POWERSMART CONSUMER POWER TOOLS WILL BE FREE FROM DEFECTS IN MATERIAL OR WORKMANSHIP FOR A PERIOD OF TWO (2) YEARS FROM DATE OF PURCHASE.
