Instructions / Assembly

11
Drive Control Handle
Located on the right side of the upper handle, the Drive Control Handle is used to engage and disengage
the drive wheels. Squeeze the Drive Control Handle against the upper handle to engage the wheels;
release to disengage.
Speed Control Lever
The Speed Control Lever is located in the center of the panel and is used to set the drive speed and
direction of travel. It can be moved into any of six positions.
Auger Control Handle
Located on the left side of the upper handle, the Auger Control Handle is used to engage and disengage
the augers. Squeeze the Auger Control Handle to engage the augers; release to disengage the augers.
Chute Rotation Handle
To adjust snow discharge direction, rotate the handle clockwise or counter-clockwise.
Skid Shoe
Position the shoes based on the surface conditions. Adjust upward for hard-packed snow. Adjust
downward when operating on gravel or crushed rock surfaces.
Augers and Impeller
When engaged, the augers rotate to cut snow and direct it into the impeller housing to be discharged out
the chute.
Clean-out Tool
The chute Clean-out Tool is conveniently fastened to the rear of the auger housing with a mounting clip.
It is used to clean the chute assembly and chute opening when snow and ice become lodged.
WARNING! Never use your hands to clear a clogged chute assembly. Shut off engine and remain behind
handles until all moving parts have stopped before unclogging.
Discharge Chute
The chute provides a discharge path for snow being thrown. The chute is adjustable.
Shave Plate
The Shave Plate maintains contact with pavement as the snow thrower is propelled, allowing snow close
to pavement's surface to be discharged.