Instructions / Assembly

CLEANING AND STORING

1. After every use and before storing, clean debris out of machine:

a. Remove spark plug cap from spark plug.

b. Allow engine to cool completely.

c. Remove the Lock Nuts and Washers holding the Hopper/Rotor

Housing assembly in place (See fig.22).

d. Clear all debris out of the Main Housing and discharge port.

e. Replace the Hopper/Rotor Housing assembly and secure in place

using the Washers and Lock Nuts.

2. Store the Chipper/Shredder in a dry indoor location that does not allow

access by children.

MAINTENANCE

WARNING:

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL STARTING:

Turn the power Switch of the equipment to its “OFF” position, wait for the engine to

cool, and disconnect the spark plug cap before performing any inspection, maintenance, or cleaning

procedures.

TO PREVENT SERIOUS INJURY FROM EQUIPMENT FAILURE:

Do not use damaged equipment. If abnormal noise, vibration, or excess smoking occurs, have the

problem corrected before further use.

Follow all service instructions in this manual. The engine may fail critically if not serviced properly.

Many maintenance procedures, including any not detailed in this manual, will need to be performed

by a qualified technician for safety. If you have any doubts about your ability to safely service the

equipment or engine, have a qualified technician service the equipment instead.

The engine must be properly maintained to ensure its operation be safe, economy and trouble-free, as

well as eco-friendly.

In order to keep your gasoline engine in good working condition, it must be periodically serviced. The

following maintenance schedule and routine inspection procedures must be carefully followed.

CHANGING/ ADDING OIL

 Replacement of engine oil (see page 14 to check

method). Drain the engine oil rapidly and completely

out when the engine is hot.

 Turn off the oil filler cap and drain plug to drain

engine oil thoroughly. Reinstall the drain plug and

screw in securely.

 Fill the specified engine oil up to the upper level mark.

 Reinstall the oil filler cap.

NOTICE: Do not dump oil containers or discarded engine oil into rubbish boxes or onto the ground.

For the sake of environmental protection, we suggest you take in discarded engine oil with a closed

container and bring to local recycling station.

Fastener Locations

Fig.22

Fig.23