Instructions / Assembly

25
Follow all safety precautions whenever diagnosing or servicing the equipment or engine.
problem possible Causes probable Solutions
Chipping action
slow, or Engine
stalling
1. Branch diameter too thick.
2. Throttle set too low.
1. Do not process branches over 3" diameter.
2. Adjust throttle to increase Engine speed.
Branch vibrates
and moves
excessively when
chipping
1. Branches are too hard and/or dried out.
2. Chipping blades are dull or damaged.
1. Material is not suitable for chipping.
2. Have qualified technician
service Chipper/Shredder.
Engine runs but
no material is
processed
1. Chipper/Shredder is jammed.
2. Throttle set too low.
1. Clear all debris out of the Main
Housing and discharge port.
2. Adjust throttle to increase Engine speed.
Unusual noise
and/or vibration
during use
1. Rotor Assembly area clogged with material.
2. Hammers loose, damaged, or
obstructed by debris.
1.
Stop adding material to Hopper/ Chipper
Chute–allow Chipper/Shredder to clear
itself before continuing.
2.
Have qualified technician
service Chipper/Shredder.