Use and Care Manual

FIG 2

English

ASSEMBLY INSTRUCTION

ATTACHING THE HOOK (FIG 2)

Attachthemetalhook(1)tothebracket(2)usingthebolt,

washersandnut,asshowninFIG2.

OPERATION

ON/OFF SWITCH

YourworklightisequippedwithanON/OFFswitch(8-FIG1)onthebacksideoftheworklight.Presstheswitch

once to turn the work light on and press the switch a second time to turn it off. Always turn the work light off before

unplugging.

MAINTENANCE

Your work light requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive cleaner.

Use the similar care for the stand.

WARNING: Always make sure the work light is unplugged and

completely cool before attempting to clean it.

WARRANTY

Thisproductiswarrantedfreefromdefectsinmaterialandworkmanshipfor2(Two)yearsafterdateofpurchase.This

limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is

coveredbythiswarrantyanditisnottransferable.Priortoreturningyourproducttostorelocationofpurchase,please

calltheToll-FreeHelpLineforpossiblesolutions.

ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 2 YEAR WARRANTY.

HELP LINE

For questions about this or any other PowerSmith™ product,

PleasecallToll-Free: 888-552-8665

Or visit our website: www.powersmithproducts.com

Richpower Industries, Inc.

736HamptonRoad

Williamston,SC29697

PrintedinChina,onrecycledpaper