User manual

24
INSTRUCTIONS OF USE
This Kit PowerSpot
Mini T
hermix
includes:
•
A Mini Thermix generator
•A double connector
•
A extension-connector cable with inlet
for E-27 light bulbs
•
A 5W PowerSpot COB bulb
1. Place the Mini Thermix over a medium
flame. The ideal flame should be about
half or less in diameter than the base of
the Mini Thermix. Within seconds the
fan will start moving and the voltmeter
will display a blinking light. If the flame is
too large or too small, the Mini Thermix
may have trouble starting before
overheating.
Although a small flame is sufficient, as
one provided by a small alcohol or
kerosene burner, its best performance is
obtained with the flame from a gas
burner. In any case, one must make sure
that the flame never exceeds the edges
of the container. In the first place
because this would subject the device to
unnecessary materials fatigue and
secondly, because any part of the flame
that exceeds the diameter of the Mini
Thermix will not heat the base and may
instead overheat the frame causing heat
damage to internal components.
•
A 5W PowerSpot bulb
•
A USB 12V / 5V-2A converter
•
A neoprene rubber bag
•
A termical label
The Mini Thermix has in its interior a
ther-mostat that will cut the 12V energy
flow when the selected temperature is
sur-passed, sending all its power to the
fan. This prevents the overheating and
burn-ing of the device due to excess of
flame
or charge.