Use and Care Manual

Page 7 - English
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this tool or create accessories
not recommended for use with this tool. Any such altera-
tion or modification is misuse and could result in a hazard-
ous condition leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-877-617-3501 for assistance.
PACKING LIST
Sander
Sanding Disc (3)
Dust Bag
Tool Bag
Operator’s Manual
FEATURES
ASSEMBLY
KNOW YOUR SANDER
See Figure 1, page 12.
The safe use of this product requires an understanding of
the information on the product and in this operator’s manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
ON/OFF SLIDE SWITCH
This sander is equipped with a simple slide switch control.
RANDOM ORBIT
The random orbit motion provides overlapping sanding
movements by combining orbital and spinning motion.
PRODUCT SPECIFICATIONS
Sanding Pad ..................................................................................................................................5 in. Hook-and-Loop Type
No Load Speed ......................................................................................................................................13,000 r/min. (RPM)
Input ..................................................................................................................................... 120 Volts, 60 Hz, AC, 2.4 Amps
Motion ........................................................................................................................................................... Random Orbital
Net Weight ............................................................................................................................................................... 3-3/4 lbs.