8561:Layout 1 10/30/2008 11:51 AM Page 1 QUICK START GUIDE PowerTap SLC+ PowerTap SL+ PowerTap Pro+ PowerTap Elite+ PowerTap 2.
18561:Layout 1 10/30/2008 11:51 AM Page 2 General Computer Operation DISPLAY LEVELS The computer has three (3) main display levels: Top Middle Bottom Power Speed Multi-Function TRANS. ICON 365 253 INTERVAL DISPLAY MI D NOTE: These locations only apply to trip and interval modes and do not apply to Cycle Computer or Heart Rate Monitor Function. See COMPUTER SETUP 4 to customize display options.
18561:Layout 1 10/30/2008 11:51 AM Page 3 2) Hold [MODE] or [SELECT] - a single button press and hold of either [MODE] or [SELECT] for 2 sec. Used for initiating a new mode or function. 3) Press [MODE] and [SELECT] - simultaneously press and release of both [MODE] and [SELECT]. Used for initiating a new interval. 4) Hold [MODE] and [SELECT] - simultaneously press and hold both [MODE] and [SELECT] for 2 sec. NOTE: If mode and select are released when “clr” is displayed, all data will be erased.
18561:Layout 1 10/30/2008 11:51 AM Page 4 FINDING SENSORS The PowerTap hub, sensors and computer are "paired" or "learned" at the factory so that the system is ready to ride once installed on the bicycle. Learning involves viewing and storing each device ID into the PowerTap computer. Information on learning can be found in computer setup 5 section of this owner's manual.
18561:Layout 1 10/30/2008 11:51 AM Page 5 ANT+ The PowerTap + Series uses ANT+Sport wireless technology that allows you to use the PowerTap with other ANT+Sport Power devices. The Garmin Edge 705 is one such device. In order to pair your PowerTap + Series hub with a Garmin Edge 705, follow these instructions or contact Garmin. 1. Check that your Garmin has the latest firmware version at www.Garmin.com 2.
18561:Layout 1 10/30/2008 11:51 AM Page 6 Computer Setup The setup feature has five(5) main modes. You do not have to complete all five to change settings. Please reference each mode to determine the correct location to begin. NOTE: The computer illustrations for each mode displays the factory default settings. FIGURE 28 Pro 5.33 COMPUTER SETUP MAIN MENU 1) Press either [MODE] or [SELECT] to activate the computer. NOTE: The version of firmware is displayed upon startup.
18561:Layout 1 10/30/2008 11:51 AM Page 7 COMPUTER SETUP 5 This setup allows the CPU to learn a new device or sensor such as the hub, heart rate strap and optional cadence sensor. NOTE: This process only needs to be used if a new sensor or hub is being used in conjunction with your CPU or vice versa. There are 2 Learn sequences, 1 and 2. Learn 1 is used when you have switched sensors or the CPU and there are no other like bikes with PowerTap within a 30’ radius.
18561:Layout 1 SPd Cd HS 10/30/2008 11:51 AM Page 8 5) Follow the above steps for any additional sensors you may be using, such as the heart rate strap, speed and cadence sensors. The sensor name is shown on the top line of the display. SPd = speed sensor Cd = cadence sensor HS = heart rate sensor Press [SELECT] to toggle through the digit values to get the I.D. Press [MODE] to advance to the next digit.
18561:Layout 1 10/30/2008 11:51 AM Page 9 TORQUE FUNCTION FIGURE 12 Shows the torque placed on the hub in inch-pounds. To display torque while in trip mode: 0003 25 MI 1) Press [MODE] to scroll the cursor to the top line of the main display. 2) Press [SELECT] until the current power function is displayed. D 58.I0 3) Hold [SELECT] until the word “WATTS” begins to flash. A blinking “WATTS” display indicates the torque function is currently displayed.
18561:Layout 1 10/30/2008 11:51 AM Page 10 Go for a ride. Your PowerTap is now ready to ride. Install PowerAgent Software PowerAgent software allows you to download and analyze your PowerTap information. Simply insert the included CD and follow the on-screen instructions or visit www.cycleops.com for more information. Instrucciones españolas www.cycleops.com/userguide Instructions françaises www.cycleops.com/userguide Deutsche Anweisungen www.cycleops.com/userguide Istruzioni in italiano www.cycleops.
