Use and Care Manual

Horsepower .................................1/3
Voltage .................................... 120
Amp ........................................ 3
Hertz ....................................... 60
Phase ................................... Single
RPM ..................................... 3260
Belt Size ................................ 1" x 30"
Belt Table Dimensions .......................5" x 5"
Dust Ports Diameter ..................... 1-3/4" OD
Base Dimensions ......................6-1/2"x 8-5/8"
Net Weight ................................11.6 lb
TABLE OF CONTENTS PRODUCT SPECIFICATIONS
SAFETY RULES 1
Work Preparation
Work Area Preparation
Tool Maintenance
Tool Preparation
ASSEMBLY 2
Unpackaging
Tool Needed
Mounting the Sanding Belt Table
Replacing the Sanding Belt
Sanding Belt Tracking Adjustment
Backstop
Dust Port Options
Mounting the Sander to Work Surface
Power Source
Grounding Instructions
Extension Cords
Motor
Electrical Connections
OPERATION 6
ON/OFF Switch
Surface Sanding On Sanding Belt
End Sanding - Belt
Contour Sanding With The Belt
MAINTENANCE 6
General Maintenance
Lubrication
TROUBLESHOOTING 7
PARTS ILLUSTRATION & 8
LIST
WARRANTY 10
SECTION PAGE