Use and Care Manual

OPERATION
5
BASIC OPERATIONS
Refer to Figures 6 - 7
Before Starting
• Place the dust collector near the dust producing
machine to be used.
• There are four hose adapters supplied. Select the hose
adapter that best fits the machine outlet and attach it to
the hose coupler.
Figure 6
Hose
Adapters
• Connect the dust collector adapter to the machine
outlet. Make sure the connection is secure.
• Make sure the machine is turned OFF.
• Connect the dust collector's power cord to the correct
power source.
OPERATION
5
To Start
• Place the dust collector's ON/OFF switch in the ON (I)
position.
• Turn the machine ON.
On/Off
Switch
Figure 7
To Stop
IMPORTANT: ALWAYS turn the dust producing machine
OFF before turning the dust collector OFF.
• Turn the machine OFF.
• Place the dust collector's ON/OFF switch in the OFF (O)
position.
GENERAL MAINTENANCE
WARNING
Make sure the machine is turned off and the cord is
disconnected from the power source before servicing and
removing/replacing any components on the machine.
• Check the dust collector daily for loose connections,
damaged wires, worn switch, full collection canister,
dirty filter cartridge/bag and any other unsafe condition.
CLEANING
Check and empty the collection canister on your dust
collector regularly. The machine operates at a much
higher level of efficiency when the collection canister is
empty.
Check and clean the filter cartridge/bag regularly. Replace
as needed.
MAINTENANCE
5
LUBRICATION
The sealed bearings in the motor have been permanently
lubricated at the factory. They require no further
lubrication.
MACHINE STORAGE
• When the dust collector is not in use, disconnect the
cord from the power source and store the machine in a
dry place.
• Do not expose the machine to rain.
• Ensure the cord is kept away from potential damage
sources such as; sharp objects, chemicals, heat
sources and water.
TOOL REPAIRS
• If power cord is worn, cut, or damaged in any way, have
it replaced immediately.
• Replace any damaged or missing parts. Use parts list
to order parts. Any attempt to repair motor may create
a hazard unless repair is done by a qualified service
technician. Call the customer service line at
847-780-6120 for assistance.
MAINTENANCE
5
ASSEMBLY