Use and Care Manual

UNPACKAGING
Refer to Figure 1.
Check for shipping damage. If damage has occurred, a
claim must be lled with carrier. Check to ensure all parts
are present. Immediately report missing parts to dealer.
The sander comes assembled as one unit. Additional
parts should be located and accounted for before
assembling.
A Table Inserts (6), (½”, ¾”, 1”, 1½”, 2” and 3”)
B Spindle Knob
C Drum Washers (5), (¾”, 1”, 1½”, 2” and 3”)
D Spindle Drums (5), (¾¾”, 1”, 1½”, 2” and 3”)
E Abrasive Sleeves (6), (½”, ¾”, 1”, 1½”, 2” and 3”)
ASSEMBLY
2
Figure 1 - Unpacking
A
B
C
E
D