Operation Manual

INSTALLING THE AIR CONDITIONING AND HEATING SYSTEM
(Optional)
The PT-3000 system uses a heating and air conditioning unit manufactured by the
Dometic Corporation. A complete installation manual is with the heating and air
conditioning system. Use this manual to successfully install the heating and air
conditioner unit.
When making electrical connections for the heating and air conditioning system,
be sure to use the RED wire on the terminal block to power the system. The white and
green wires will be connected to the terminals along with the power outlet box white and
green wires. It is VERY IMPORTANT these connections be made this way to prevent
overload to a single circuit. Make certain all connections are tight and secure.
Once all connections are made, install the terminal block cover using the screws
provided.
BATTERY CHARGER INSTALLATION
The PT-3000 system includes a separate battery charger which will be installed in the cab
of the vehicle. Choose a convenient location with adequate spacing (3” min.) and
ventilation for the fan. Follow the manufacturers’ installation manual included with the
battery charger
. Two leads (Red & Black) are supplied with the loose parts and will be
used to connect the battery charger to the vehicle batteries. Carefully route all wiring and
secure with appropriate hardware.
16