Operation Manual

After the unit is attached to the frame of the vehicle, all that is usually required to
make it operational are the following.
Install the fuel pick-up tube assembly
Route and install fuel lines
Install and connect remote panel
Attach Load Leads to vehicle’s AC electrical circuit
Install and connect Battery Charger
Check radiator coolant level
Check crankcase lubricating oil level
Connect DC battery cables.
Continuing improvements and advancements in product design may cause
changes not included in this manual. Please contact Power Technology’s Customer
Service Department for the latest information regarding your PT-3000 system.
TO OUR CUSTOMER
Thank you for your purchase of a PT-3000System. The information contained in
this manual applies only to PT-3000 Idle Reduction Systems.
In the event you should experience a problem with your system please contact the sales
dealer, authorized PT-3000 Service Center or Power Technology’s Customer Service
Department directly at [phone] from 8:00 a.m. to 5:00 p.m. EST Monday through
Friday. Please have the system model and serial numbers available when you call, this
will help expedite service and parts to you.
POWER TECHNOLOGY SOUTHEAST, INC.
634 STATE ROAD. 44
LEESBURG, FL. 34748-8102
[phone] FAX [phone]
www.PowerPacAPU.com
E-Mail Power [e-mail]
2