Operation Manual

29SPECIFICATIONS
ENGLISH
A Specifications are subject to change without notice.
NOTE (FOR E3BG or T-E3BG type):
A Flywheel type is SAE clutch No.11-1/2, SAE clutch No.10 or its equivalent.
A Flywheel housing type is SAE No.3 or its equivalent.
A Governor drop is within 5%.
A Continuous will operate at the stated rating continuously and have a 10% overload capability for one hour in 12
hours.
A Standby will operate at the stated full rating for one hour in 12 hours. No overload capacity is specified for this rating.
Model V3600-T-E3BG
Type Vertical, water-cooled, 4-cycle diesel
Number of cylinders 4
Bore and stroke mm (in.) 98 × 120 (3.86 × 4.72)
Total displacement L(cu.in.) 3.620 (220.9)
Combustion type Spherical type (E-TVCS)
SAE NET Continuous kW / min
-1
(rpm)
H.P. (SAEJ1349) (HP / min
-1
(rpm))
39.2/1800 (52.5/1800)
32.1/1500 (43.0/1500)
SAE Standby kW / min
-1
(rpm)
H.P. (SAEJ1349) (HP / min
-1
(rpm))
43.1/1800 (57.8/1800)
35.3/1500 (47.3/1500)
Maximum bare speed min
-1
(rpm) 1890
Order of firing 1-3-4-2
Direction of rotation Counter-clockwise (viewed from flywheel side)
Injection pump Bosch type mini pump
Injection pressure MPa
(kgf / cm
2
, psi)
13.93 (142, 2020)
Injection timing (Before T.D.C.) 0.09 rad (5°)
Compression ratio 21.8
Fuel Diesel fuel oil No.2-D
Lubricant (API classification) above CF grade
Dimension mm (in.)
(length × width × height)
769 × 539 × 803
(30.28 × 21.22 × 31.61)
Dry weight kg (lbs.) 283 (624)
Starting system Cell starter (with air heater)
Starting motor 12V, 3.0kW
Charging generator 12V 540W
Recommended battery capacity 12V, 88AH