Spec Data Sheet

Doc. No. :SPE070W1D1-4 v.1x Rev. No. : 0.1 Page : 5/29
This specification data sheet is an intellectual property of PowerView Display Corporation. Any copy, reproduction
or modification without written permission of PowerView Display Corporation is not allowed.
PowerView Display Corporation, http://www.powerview.com.tw
1.0 Handling Precaution
1.) Handle with care. Pay attention not to press or scratch the surface of the system screen,
especially the polarizer. Do not twist or bend the whole module or any part of the system
kit. It may cause un-recoverable damages to the system.
2.) Do not drop or bump the system kit since the LCD display of the system contains fragile
glass components. Breakage of this portion might cause leakage of the liquid crystal
sealed inside the displays. Do not touch the liquid crystal liquid in case of leakage.
Flush with massive water immediately in case of contact with your skin with liquid crystal
fluid and call for doctor for immediate medical treatment.
3.) Be sure to turn off power supply while plug or un-plug the power input connector.
4.) Clean up the polarizer only with soft solvent if necessary. The desirable cleaners are
water, IPA (Isopropyl Alcohol) or Hexane. Do not use Ketone type materials (ex.
Acetone), Ethyl alcohol, toluene, Ethyl acid or Methyl chloride. It will permanently
damage the polarizer due to chemical reaction.
5.) Wipe off fluid drop immediately to prevent from possible discoloration or spots on the
polarizer.
6.) Do not twist nor bend the system structure, even momentarily. Bending or twisting
torque may likely damage the internal components of the system.
7.) Protect the system from static environment to prevent from damage to the CMOS gate
array IC.