Spec Data Sheet

Doc. No. :SPE070W1D1-4 v.1x Rev. No. : 0.1 Page : 7/29
This specification data sheet is an intellectual property of PowerView Display Corporation. Any copy, reproduction
or modification without written permission of PowerView Display Corporation is not allowed.
PowerView Display Corporation, http://www.powerview.com.tw
There is a graphic drawing utility available, which is developed by PowerView to let customer
control this embedded system by using the ASCII command code via RS232 interface. With the
help of this graphic utility, customer can easily develop their own application software without the
complex programming skill which usually is needed by the other embedded systems on the market.
2.1 General Applications
- Portable Devices, Compact Diagnostic Tools, Surveillance and Monitoring Equipment,
Control and HMI Terminals.
* This product needs to be installed by professional person and the place will be different by
the type of the car. End user is not allowed to install the product.
2.2 Main Features
- Built-in Sunlight Readable Brightness Digital 7” WVGA LCD
- Projective Capacitive (PCAP) Touch Screen
- Embedded ARM9 MCU Engine
- Built-in 64MB SDRAM and 128MB Flash Memory
- Linux Kernel Version 3.10.102
- Versatile I/O functions
- All-IN-ONE unit with Single DC power Supply Input
- Ultra Wide Input Voltage Range +6VDC ~ +55VDC
- LTE module, supporting multi-bands LTE-FDD, W-CDMA, CDMA
- Bluetooth 4.1, supporting Dual-Mode(Bluetooth and Bluetooth LE)
- RFID module (125KHz)
- GPS module, supporting GPS
- IP-65 module connectors, adopted with Deutsch DT04-12PA 12 way Connector
- Build-in battery, support sleep mode
- Build-in RTC function
- Build-in Defrost heater
- Support external Wiegand26 card read