Safety Guide

• Pre-ight Checklist

1. Ensure that you use only genuine PowerVision parts and that all parts are in good condition.

2. Ensure that PowerEgg X has been congured to ight mode. Ensure that the arms on both sides of the aircraft are in place. Ensure

that the battery and battery cover are secured in place.

3. Ensure that the arms and undercarriage of the aircraft have fully unfolded, that the aircraft is level and steady, and that the

propellers have unfolded. Ensure that there are no obstacles in or around the y zone.

4. Ensure that the remote controller, aircraft battery, and your mobile device are all sufciently charged.

5. Ensure that there is no foreign object stuck to the camera lens or the visual system lens and that they have no damage (scratches,

cracks, or chips).

6. Ensure that the gimbal protector is removed, that gimbal motors are clean and intact, and that the gimbal can rotate freely.

7. Ensure that the protective lms are removed from the camera and visual system.

8. Ensure that the visual system lens is clean and spot free.

9. Ensure that the propellers are not damaged, worn, or deformed, and that they are securely mounted and tightened onto the motors.

10. Ensure that the aircraft motors are clean and intact, and that the motors can start and function normally.

11. Follow the on-screen instructions in the app to calibrate the compass or IMU.

12. Ensure that the rmware of the aircraft, the remote controller, as well as the app have been upgraded to the latest version.

13. Ensure that you are familiar with every ight mode, and that you are familiar with the behavior of the aircraft in out-of-control

return mode.

14. Thoroughly familiarize yourself with all local laws and regulations regarding aircrafts. Be sure to apply for the authorization of

using an aircraft from local authorities in pursuance to applicable laws and regulations.

15. Ensure that the app runs normally. PowerVision will not be able to provide you with warranty and other after-sales services and

shall assume no liability to you if the Vision+ 2 App is not running during ight.

16. You need to agree to the terms of use of the Vision+ 2 App and PowerVision's privacy policy before using the Vision+ 2 App. The

17. Please make sure that the smart battery of the drone is charged.

18. Please make sure the GPS or visual positioning system can receive proper information to navigate the drone.

• Flight Operation Requirements

1. Do not start the motors before unfolding the arms/undercarriage; otherwise, the aircraft may become damaged.

2. Be careful of the battery buckles on each side when holding the aircraft; avoid pressing them simultaneously, as this will cause the

battery cover to drop off.

3. Do not touch gimbal motors and aircraft internal to avoid personal injury and mechanical damage to the product. In order to