User Manual

CONTENTS

1. Introduction ······························································································· 5

2. Safety Warning ··························································································· 2

2.1 Description of Commonly Used Symbols ····················································· 2

3. Installation ································································································· 3

3.1 Inspection of Unit ···················································································· 3

3.2 Unpacking the Cabinet ············································································· 3

3.3 UPS Setup ···························································································· 3

3.4 EBM Installation (Optional) ······································································· 8

3.5 UPS Initial Startup ················································································· 14

4. Operation ································································································· 15

4.1 Display Panel ······················································································· 15

4.2 Operating Mode ···················································································· 19

4.3 Configuring Load Segment ····································································· 19

4.4 Configuring UPS for EBM Numbers ·························································· 20

4.5 Configuring Green Function ···································································· 20

5. Communication Port ················································································· 21

5.1 RS-232 and USB Communication Ports ····················································· 21

5.2 Emergency Power Off (EPO) ··································································· 21

5.3 Network Management Card (Optional) ······················································ 22

6. UPS Maintenance ······················································································ 23

6.1 UPS and Battery Care ··········································································· 23

6.2 Storing the UPS and Batteries ································································· 23

6.3 Time to Replace Batteries ······································································· 23

6.4 Replacing UPS Internal Batteries ····························································· 24

6.5 Testing New Batteries ············································································ 26

6.6 Recycling the Used Battery: ···································································· 26

7. Specification ···························································································· 27

7.1 Specification ························································································ 27

7.2 Rear Panels ························································································· 29

8. Trouble Shooting ······················································································ 32

8.1 Audible Alarm Trouble Shooting ······························································· 32

8.2 General Trouble Shooting ······································································· 32

9. Software Installation ·················································································· 33