User Manual

3. Installation

3.1 Inspection of Unit

Inspect the UPS upon receiving. If the UPS is apparently damaged during the

shipment, please keep the box and packing material in original form for the

carrier and notify the carrier and dealer immediately.

3.2 Unpacking the Cabinet

To unpack the system:

1. Open the outer carton and remove the accessories packaged with the

cabinet.

2. Carefully lift the cabinet out of the outer carton and set it on a flat, stable

surface.

3. Discard or recycle the packaging in a responsible manner, or store it for

future use.

Package content: UPS, Input Power Cord, 2x IEC cable, Tower Holder,

Rack Ears, EPO Plug, USB cable, Software CD, manual

3.3 UPS Setup

All model series are designed for tower and rack purpose. They can be

installed into a 19 inches equipment rack. Please follow the instruction for

Tower Setup and Rack-Mount Setup.

 Tower setup

This series of UPS can be placed horizontally and vertically. As a tower

configuration, it is provided with the optional UPS stands to stabilize the UPS

when the UPS is positioned in vertical. The UPS stand must be attached to the

bottom of the tower.