Manual

ManualsBrandsPowerWalker ManualsHardwareSNMP DP-522

Table Of Contents

Chapter1. Introduction
Chapter 2. NetAgent UPS Installation
Chapter 3. NetAgent, UPS and Network Connection
- Section1. Install the NetAgent II with UPS and Network
  - 1.1 For External NetAgent II
  - 1.2 For Internal NetAgent II
- Section2. Install the NetAgent Mini with UPS and Network
  - 2.1 For External NetAgent Mini
  - 2.2 For Internal NetAgent Mini
Chapter 4. Using Netility Setup IP.Update Firmware
- Section1. Install Netility
- Section2. Using Netility
Chapter 5. UPS Web management by NetAgent
Chapter 6. Telnet (Remote Configuration)
- Section1. Introduction
- Section2. Telnet Configuration
Chapter 7. ClientMate - Windows Shutdown Utility
- Section1. Install ClientMate
- Section2. Using ClientMate
Chapter 8. SNMPView – Windows Based UPS Management System
Appendix A - Update the firmware of NetAgent UPS
Appendix B -3 Ports NetAgent II with SMS Modem
Appendix C –SMS Server with SMS Modme

Section2. NetAgent UPS Web Interface

Enter NetAgent UPS Web page,there are 4 main function items in the first Web

page:

2.1 Information

2.2 Configuration

2.3 Log Information

2.4 Help

Enter the main function item, the sub-menu items will be shown on the left side

of the page. When using this NetAgent for the first time, please enter the

[Config] menu item to set all the configuration items. Then the UPS

status could be correctly revealed by other pages.

Fig.14 NetAgent UPS - single port

Fig.15 NetAgent UPS - 3 ports

18