Manual
Table Of Contents
- Chapter1. Introduction
- Chapter 2. NetAgent UPS Installation
- Chapter 3. NetAgent, UPS and Network Connection
- Chapter 4. Using Netility Setup IP.Update Firmware
- Chapter 5. UPS Web management by NetAgent
- Chapter 6. Telnet (Remote Configuration)
- Chapter 7. ClientMate - Windows Shutdown Utility
- Chapter 8. SNMPView – Windows Based UPS Management System
- Appendix A - Update the firmware of NetAgent UPS
- Appendix B -3 Ports NetAgent II with SMS Modem
- Appendix C –SMS Server with SMS Modme
2.2.8 WEB/Telnet
This page is to set up the User Account in NetAgent.
User Account
User Name
This section is to set a user name for NetAgent web pages. It is valid for up to 8 users.
Users have to input the user name to get access to NetAgent web pages from a web
browser.
Password
This section is to set a password for NetAgent web pages. Users have to input the
password to get access to NetAgent web pages from a browser.
Permission
This section is to set user’s authorizations of Read, or Read/Write.
IP Filter
This section is to set a particular IP address. Users can only gain access to NetAgent
web pages if they come from this IP address. If you want to manage NetAgent from any
IP address, you can set it as *.*.*.*
Fig.30 WEB/Telnet
41