Manual

Chapter 8. SNMPView – Windows Based UPS Management System
Section1. Introduction
SNMPView is a software to remotely monitor and control multiple UPS connected to
a network. When an event occurs, SNMPView can be programmed to send an
email or a pager to inform the designated network manager. It can also inform the
user of the UPS current condition or configuration, perform self-test, send a history
file, turn the UPS On/Off and more.
SNMPView features;
n A windows interface that is simple and user friendly.
o Automatic detection and identification of any UPS with NetAgent II or NetAgent Mini
connected to a network.
p Capable of simultaneously monitoring up to 1,000 UPS
q Remotely control, monitor, and manage the networked UPS (Turn On/Off, Self-test,
etc...)
r Able to simultaneously support both RS-232 Interface (1 or 3 phase) and Contact
Closure Interface UPS.
s UPS condition displayed in either a graphic or analog bar chart.
t Supports MegaTec's SNMP Agent and SNMP Internal Card.
u Able to send email for notification
v Able to send SMS for notification
Section2. System Requirements
n LAN/WAN network system with TCP/IP
o RS-232 Interface or Contact Closure Interface UPS
p External SNMP Agent or SNMP Internal Card
q Microsoft Windows 95, 98, NT, 2000, XP, Me, 2003,2008,Vista,7
61