Manual

ManualsBrandsPowerWalker ManualsHardwareSNMP DP-522

Table Of Contents

Chapter1. Introduction
Chapter 2. NetAgent UPS Installation
Chapter 3. NetAgent, UPS and Network Connection
- Section1. Install the NetAgent II with UPS and Network
  - 1.1 For External NetAgent II
  - 1.2 For Internal NetAgent II
- Section2. Install the NetAgent Mini with UPS and Network
  - 2.1 For External NetAgent Mini
  - 2.2 For Internal NetAgent Mini
Chapter 4. Using Netility Setup IP.Update Firmware
- Section1. Install Netility
- Section2. Using Netility
Chapter 5. UPS Web management by NetAgent
Chapter 6. Telnet (Remote Configuration)
- Section1. Introduction
- Section2. Telnet Configuration
Chapter 7. ClientMate - Windows Shutdown Utility
- Section1. Install ClientMate
- Section2. Using ClientMate
Chapter 8. SNMPView – Windows Based UPS Management System
Appendix A - Update the firmware of NetAgent UPS
Appendix B -3 Ports NetAgent II with SMS Modem
Appendix C –SMS Server with SMS Modme

5.3.3 UPS Management

To configure SNMP of its

NetAgent UPS

79