Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS – This manual contains important instructions for models

PowerWalker VI 650/850/1000/1500/2000 LCD /UK that should be followed during installation

and maintenance of the UPS and batteries.

 This product is specially designed for PCs and it is not recommended for use in any life-

supporting system and other specific important equipment.

 This equipment can be operated by any individual with no previous training.

 Do not plug household appliances such as hair dryers to UPS receptacles.

 This unit intended for installation in a controlled environment (temperature controlled,

indoor area free of conductive contaminants). Avoid installing the UPS in locations where

there is standing or running water, or excessive humidity.

 Risk of electric shock, do not remove cover. No user serviceable parts inside. Refer

servicing to qualified service personnel.

 The utility power outlet shall be near the equipment and easily accessible. To isolate UPS

from AC input, remove the plug from the utility power outlet.

 If UPS is to be stored for a long time, it is recommended to recharge the batteries (by

connecting the utility power to UPS, switch “ON”), once a month for 24 hours to avoid a

full battery discharge.

 Please do not use the UPS in excess of the rated load capacity.

 The UPS contains one/two large-capacity batteries. So the shell shall not be opened,

otherwise such dangers as electric shock will be caused. If any internal overhaul or

replacement of the battery is required, please contact the distributor.

 The internal short circuiting of the UPS will lead to dangers such as electric shock or fire,

therefore, no water containers (such as a water glass) shall be placed on the top of the

UPS so as to avoid such dangers as electric shock.

 Do not dispose of battery or batteries in a fire. The battery may explode.

 Do not open or mutilate the battery or batteries. Released electrolyte is harmful to the

skin and eyes. It may be toxic.

 Icon Φ on the rating label stands for phase symbol.

 A battery can present a risk of electrical shock and high short circuit current. The

following precautions should be observed when working on batteries :

 Remove watches, rings, or other metal objects from the hand.

 Use tools with insulated handles.