VMware Shutdown Wizard User’s Manual
Table of Contents 1. 2. Introduction...........................................................................................................................2 VMware Shutdown Wizard install, quick start, stop, and uninstall ...................................2 21. Install ................................................................................................................... 2 22.Quick Start......................................................................................................
1. Introduction VMware Shutdown Wizard is a shutdown software specially designed for VMware system. It will receive the shutdown command from ViewPower Pro or ViewPower to turn off all the running virtual client units with VMware system. 2. VMware Shutdown Wizard install, quick start, stop, and uninstall 21. Install Required software: VMware Infrastructure Client. File name for VMware Shutdown Wizard software：VPVMShutdownWizard.tar.gz 1) Upload software to VMware ESX system. a.
Figure 2. d. Click icon from tool bar, and then select “Upload File…” (Refer to Figure 3) Figure 3. e. A dialog of “upload item” will pop up.
f. Figure 4. “Upload Items” dialog Select the VPVMShutdownWizard.tar.gz file and click “Open” button to upload the compressed package as shown in Figure 5. Figure 5 2) Install Software a. Log in to Console page of VMware ESX system. Then, enter the following address “cd /vmfs/volumes/storage1/”. This can also be varied due to different storage name.
Figure 6. b. Run “tar zxvf VPVMShutdownWizard.tar.gz” command to unzip the compressed file. Refer to figure 7. Figure 7. c. Key in “cd VPVMShutdownWizard” to access the VPVMShutdownWizard catalogue. Then run “./INSTALL” to install and auto run the software. Refer to figure 8. Figure 8. d. After installation , the default path is set to “/vmfs/volumes/datastore1/VPVMShutdown” as shown in Figure 9.
Figure 9. 22. Quick Start It will run automatically after installation. If it’s not automatically running, you may key in the “ps e | grep ShutdownWizard”（for ESXi 5.0 :”ps –C | grep ShutdownWizard”） for double checking. Once it’s not running as requested, key in “cd /vmfs/volumes/datastore1/VPVMShutdown/ShutdownWizard/” to enter installation menu and then enter “./run” to manually start the software. Figure 10.
23. Stop Key in the path of “cd /vmfs/volumes/datastore1/VPVMShutdown/ShutdownWizard/” and then, run the command of “./stop” as shown below. Figure 11. 24. Uninstall Key in the path of “cd /vmfs/volumes/datastore1/VPVMShutdown/ShutdownWizard/” to enter the installation menu. Then, run the command of “./UNINSTALL” to uninstall the software.
