User's Manual

SPA9323-30C Installation & Service Manual
© Copyright Powerwave Technologies, Inc., October 2004. All rights reserved
044-05178 Rev. A 2-4 October 2004
2-4.2 Amplifier RF Connectors
The amplifier has two RF connectors. The RF Input connector is a SMA female. The input power
on this port should not exceed the level specified in table 1-1. The RF Output connector is Type
N female. They are listed and described in table 2-2.
Table 2-2 Amplifier RF Connector Definition
Function Description
RF Input SMA Female
RF Output Type N Female
2-4.3 DC Power Connector
The DC power connector is a three-pin high current contact D-subminiature connector. The pin
configuration is listed in table 2-3 and shown in figure 2-3.
Table 2-3 DC Power Connector Definition
Pin Description
1 -48 V
2 Chassis Ground
3 Battery Return
Figure 2-3 DC Power Connector