Manualshelf

User's Manual

ManualsBrandsPowerwave Technologies ManualsElectronicsFiber-Fed Repeater/Radio Head
51525354555657585960
Powerwave Fiber Optics
VM100 56/EN – User’s Manual Rev. P1A9-Draft 2004-11 5 - 3
Requirements
To be able to use an IP network, the FON hardware and software stated below is
required. Hardware and software that does not meet the requirements below can be
upgraded.
FON hardware
FON board K129.
FON software
FON SA102 05/1 version R1A or higher.
O&M software versions
An OM-Online, OMT32, or OMS station intended to be used on an IP network requires
the following software versions:
OM-Online SA102 60/1 version R1A or higher.
OMT32 SA102 51/3 version R2A or higher.
OMS SA102 54/1 version R2A or higher.