User's Manual

Powerwave Fiber Optics
VM100 56/EN – User’s Manual Rev. P1A9-Draft 2004-11 5 - 7
Network Example
An example of a repeater network with FON units is shown in Figure 5-6.
Figure 5-6. Repeater network example
This network has a BMU with three FON units as F-net master nodes. Two of which are
gateway units. A backbone W-net interconnects the three FON units.
The three F-subnets (FLI) are connected to slave FON nodes via optical splitters. These
slave FON nodes are connected to compact repeaters (BSC) and standard repeaters (CU)
via W-subnets (WLI).
In this network there are four gateways connected to an RCU or RCC unit.
Further information about IP networks, IP address planning, and network configuration
is found in the VM100 01/EN, OM-Online, User’s Manual.
RCC
RCC
BMU/OCM
BSC
WLI
WLI
FLI
FLI
FLI
WLI
FO
FON
FO
FO
FON
FON
FON
BSC
WLI
FON
WLI
FON
BSC
WLI
FON
CU
WLI
FON
CU
RCU
BSC
BSC
RCC
FON
CU