Product Manual

6
oPeratIng InStructIonS
Please read the following instructions carefully. They will help to get the best performance from this professional commer-
cial vacuum cleaner and to maintain it in optimum condition. Always make sure the main power of the vacuum is off and
the unit is not plugged in when doing any maintenance on the vacuum.
Preparing To Vacuum
1. Remove vacuum hose from top of unit. Rotate to position
shown in Fig. 1 and pull upward.
2.Releasethetwolatchesandliftofflid(gure2&3).
3. Ensuremicroclothbagisfullyseatedontankhousing(gure4).
4.Insertpaperbaginsidemicroclothbag(gure5).
5.Ensurethatpaperbagisnotprotrudingundercardboardange
 (gure6).
6. Replace lid, lock down the two latches and install hose.
7.EnsurecordisretainedbytheP-Clamp(gure7).
8. Store the power cord on the cord hook located on the harness
 frameaftereachuse(gure8).
9.AfxtheSwitchboxtotheharnesswiththeavailablestraps. 
 (gure9).
Always use the P-clamp. There is a
risk of electrical shock/damage to
the backpack vacuum if P-clamp is
not used. (Fig. 7)
WARNING!
IMPORTANT!
PERFORM PROPER INSTALLATION OF HEPA BAGS AND CORD
IN COMFORT PRO BACKPACK VACUUMS.
1.
3.
5.
7.
2.
4.
6.
8.
9.
Powr-Flite.com