Product Manual

ManualsBrandsPowr-Flite ManualsCleaning + JanitorialClassic 17in. Floor Machine — 1.5 HP, 175 RPM

OPERATOR’S MANUAL

WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL

COMPLETELY BEFORE OPERATING THIS EQUIPMENT.

Save These Instructions

175 RPM, 1 HP models - C131-7 C171, C201

175 RPM, 1.5 HP models - C171HD, C201HD

Sander, 175 RPM, 1.5 HP models - C171SD

175 - 320 RPM, 1.5 HP models - C202

X8692 11/2018

Summary of content (8 pages)

PAGE 1
OPERATOR’S MANUAL 175 RPM, 1 HP models - C131-7 C171, C201 175 RPM, 1.5 HP models - C171HD, C201HD Sander, 175 RPM, 1.5 HP models - C171SD 175 - 320 RPM, 1.5 HP models - C202 WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT.
PAGE 2
Your new Powr-Flite floor machine will afford you many years of trouble-free operating satisfaction provided it is given proper care. Prior to packaging, your Powr-Flite floor machine was inspected by a Quality Control Technician. UNCRATING Your Powr-Flite floor machine was protectively packed to prevent damage in shipment. We suggest that upon removing the unit from its carton, you carefully inspect it for any possible damage in transit.
PAGE 3
This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk electric shock. This machine is equipped with a cord having an equipment -grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
PAGE 4
PREPARING THE MACHINE To attach the drive block or brush or other attachment, be sure the handle is “locked” in the upright position. Lay the floor machine on its back with the handle lying on the floor, this exposes the driving plate on the underside of the floor machine.
PAGE 5
TROUBLESHOOTING Machine does not run. • • The circuit breaker has tripped. Allow the circuit breaker 2 minutes to cool before resetting. Plug is broken or has loose contact. Replace. Machine will not start. • • • • Circuit breaker is not reset. Reset breaker. Plug is broken or has a loose contact. Replace. Circuit breaker is defective or weak. Replace. Switch is defective. Replace switch. Machine will not reach operating speed.
PAGE 6
PAGE 7
Ref Part# 1 X8911 M8600-3 2 X8941 3 X8914 4 X8927 5 X8923 6 F5P 7 X8013 8 X8023 X8023A 9 X8266 10 X8412-C X8982 X8983 X8984 X8985 X9101 11 X8965 12 X8106 13 X8265 14 X8020 15 X8024 16 X8101 17 X8980 X8981 X8071-TI 18 X8400A 19 X8966 20 X1149 X8967A X8968A 21 X8212 22 X8218 23 X8219 24 72455A 25 X8977 26 X9575 27 X8107 28 X8807L 29 X8807R 30 X8989 31 X8016 32 X8012 33 X1184 Description Handle, All Metal Handle assembled (includes #1 through #7) Handle grip 1” diameter Thumb switch actuator Label Logo, Metal
PAGE 8
Powr-Flite Warranty Statement All Powr-Flite equipment has been tested and inspected at the factory and is guaranteed to be free from defects in material and workmanship for the duration described below. For full details, contact your authorized Powr-Flite Distributor, Service Center, or the Powr-Flite Technical Service Department.