OPERATOR’S MANUAL & PARTS LIST COMMERCIAL AIR MOVER PDS1 and PDS1DX Models WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT. ©Tacony, Inc.
Introduction Check the carton for shipping damage. Carefully unpack and inspect your new Powr-Flite dryer for shipping damage. Each unit is tested and thoroughly inspected prior to shipping. If damage is discovered, immediately notify the transportation company that delivered your machine and request an inspection. As a manufacturer, we are unable to act upon any claim for concealed damage; you must originate the claim.
Safety Warnings and Precautions all instructions before using. Save These Instructions. WARNING! Read Following the cleaning instructions will prolong the life of your Powr-Flite Dryer. To reduce the risk of fire, explosion, electric shock, or injury, the following precautions should always be followed. 1. Use only as described in this manual. Use only manufacturer’s recommended attachments. 2.
Français FR Safety Warnings and Precautions INSTRUCTIONS IMPORTANTES RELATIVES À LA SÉCURITÉ Lors de l’utilisation d’un appareil électrique, des précautions de base doivent être observées, notamment les suivantes : LISEZ TOUTES LES INSTRUCTIONS AVANT D’UTILISER CETTE MACHINE AVERTISSEMENT - Pour réduire le risque d’incendie, d’explosion, de choc électrique ou de blessure: 1. Utilisez uniquement la machine comme indiqué dans ce manuel. Utilisez uniquement les accessoires recommandés par le fabricant. 2.
Grounding Instructions This dryer must be grounded! Grounding is a safety measure to reduce the risk of electrical shock to the operator should the machine malfunction or stop working. Grounding provides the path of least resistance for electric current and will trip the circuit breaker, stopping the flow of electricity. This unit is equipped with a cord containing an equipment-grounding conductor and grounding plug.
Operating instructions MACHINE COMPONENTS 1. MACHINE MAINTENANCE 2. 3. 5. To keep machine in good working condition, simply perform the following maintenance procedures. WARNING! Unplug cord from outlet when not in use and before servicing machine. 1. Inspect power cord for damage after each use. Replace power cord immediately if damaged. 2. Clean machine with a damp cloth. 3. Check for dust accumulation around the air inlet and outlet vents and clean if necessary.
Schematic Parts List and 16 18 12 10 14 8 5 13 1 11 17 7 9 3 4 6 15 2 ITEM PART NO.
Powr-Flite Limited Warranty Powr-Flite will repair or exchange parts for your dryer in the event of a manufacturing defect as follows: PARTS: New or comparable rebuilt parts, for one year after original purchase. Five year warranty on housing. LABOR: Carry-in service can be obtained during the warranty period by taking your dryer to an Authorized Powr-Flite Warranty Service Center.
