User Manual

Your Powr-Flite vacuum cleaner comes equipped with a Manual Reset Thermal Fuse Protector. This thermal

protector is designed to protect your vacuum cleaner from overheating due to a cutoff in airflow (i.e. clogged

hose, operating the vacuum without a bag). Should this situation occur, the thermal fuse protector will safely shut

off your vacuum cleaner to avoid any potential damage.

To reset the thermal fuse:

1. Unplug the vacuum cleaner.

2. Check for problem (over filled bag, clog in hose, clogged filters, etc.).

3. Correct problem.

4. Locate "tripped" fuse — the small red button located on the bottom of the back side of the main body (roughly

one inch to the right of the left wheel).

5. Using a pencil, paper clip, or other pointy object, push the reset button.

6. Plug vacuum cleaner in and begin using.

Please refer to your Authorized Powr-Flite Dealer with any questions.

THERMAL FUSE PROTECTION

• Keep machine and all accessories clean and in good operating condition.

• Change filter bags and filters as recommended to maintain optimum cleaning efficiency.

• Always use genuine Powr-Flite filter bags and filters, as use of other products may result in poor cleaning or

filtration performance. Powr-Flite filtration products are designed for maximum performance.

• Have machine checked periodically by an Authorized Powr-Flite Vacuum Service Center.

• Use only Powr-Flite Vacuum Cleaner authorized Service Centers for parts or service.

• Store machine carefully in dry area.

• For optimum cleaning performance and safety, study and follow your Owner's Manual. Keep it in a handy

and safe place for future reference.

FOR BEST PERFORMANCE