User Manual

HANDLE ADJUSTMENTS

The handle on this vacuum cleaner can be set to one of three

positions – upright, middle, or low.

How to Adjust the Handle

1. To release the handle, step on the PowrFoot label on the nozzle

and tip the handle backwards. (Fig.1).

2. Middle position – for normal cleaning (Fig. 2).

3. Upright position – for when cleaning tools are used or for

storage (Fig 3). Handle locks in this position.

4. Low position – for cleaning under furniture (Fig. 4).

Fig. 1

Fig. 2 Fig. 3 Fig. 4

MOTOR PRE-FILTER

Your Powr-Flite vacuum cleaner is equipped with a motor pre-filter to

protect the motor from dirt. Accumulated dirt in the dust compartment

will be collected on this filter and may restrict motor performance. It

is important to clean the filter regularly as needed.

To Clean Motor Pre-Filter:

1. Unplug the vacuum cleaner. Remove filter bag.

2. Remove bag support (Fig. 5).

3. Remove filter and clean with water only. Allow to air dry 24 hrs.

(Fig. 6).

4. Reinsert filter and bag support. Reinstall filter bag.

Fig. 5

EDGE CLEANING FEATURE

The edge cleaning feature provides for improved cleaning of carpets near wall and stationary furniture.

Fig. 6