User Guide
11
Revision 4.0
d) Interior horizontal pole mount with bracket
and supplied cable clamp
Exploded View
Wall mount with supplied bracket and wall knock-
in screws.
• Select a suitable place for mounting the
antenna.
• Attach the bracket onto the base of the
antenna using four flat head screws.
• Using the wall mount bracket as a guide,
mark two points to drill on the wall. Use a
Ø6mm masonry drill bit to drill the marked
points.
• Place the bracket over the two holes and line
up the holes in the bracket with the holes in
the wall.
• Insert the two knock-in screws to mount the
bracket to the wall.