Connector Crimping Guide

With the tool still
in the closed
position, pull
cable out. This
will properly
remove the cut
materials.
4
Using your thumb or
finger tip, carefully pull
back the braid from the
dielectric leaving the foil
in place. When prepping
quad shield cable, pull
back the first layer of
braid, remove the first
layer of foil, and pull back
the layer of braid closest
to the dielectric. Leave
the foil around the
dielectric in place.
5
¼” ¼”
Cable, prepped with the
proper tool, will have ¼”
center conductor and ¼”
dielectric exposed.
!
¼”
Ensure that any
braid extending
longer than ¼” is
trimmed to the
proper length
Prepping the Cable