Use and Care Manual

SPECIFICATION DATA
DESCRIPTION
FEATURES
• High-solids alkyd-oil formula, one-coat
application
• High-transparency transoxide pigments
amplify depth of color, clarity and substrate
protection
• Excellent penetration for long-lasting
protection and longer-lasting color
• Powerful UV absorbers protect color and
wood substrate
• Water-repellent
• Provides a mildew-resistant finish
• SRD RE is a reduced-emissions product with
<275 g/L VOC
Cetol SRD RE (Reduced Emissions) Wood
Finish is transparent matte finishes for siding,
rails and decks. Available in a curated palette
of eight richly-saturated wood tones.
Trans
par
ent
Matte
Cetol
®
SRD RE Wood Finish
SIK250
Clean-up Solvent:
Mineral Spirits
Resin:
Alkyd
Density*:
7.77 - 7.83 lbs/gal (0.93 - 0.94 kg/L)
VOC*:
<275 g/L (2.29 lbs/gal)
Solids*:
Volume - 66% - 67% +/- 1%
Weight - 71% - 72% +/- 1%
Practical Coverage:
On rough and weathered surfaces,
150-200 sq ft/gallon (4-6 m
2
/L).
On smooth surfaces or hardwoods,
250-400 sq ft/gallon (6-9 m
2
/L).
Actual coverage may vary depending on the
type, age and texture of the wood and
application method.
Dry Time 77°F (25°C) & 50% RH:
To touch - 12 hours
To light foot traffic - 48 hours
Wait 72 hours before replacing furniture.
Low temperature, high humidity or poor
ventilation will increase these times. Avoid
heavy abrasions immediately following
application
Shelf Life:
5 years maximum - unopened
Disposal:
Contact your local environmental regulatory agency
for guidance on disposal of unused product. Do not
pour down a drain or storm sewer.
*Data may vary with product color.
Read Label and Material Safety Data Sheet Prior to Use. See other cautions on last page.
SHIPPING
FREIGHT CLASSIFICATION:
Paint, Combustible Liquid, PGIII
PACKAGING:
1 gallon (3.785 L)
5 gallons (18.925 L)
FLASH POINT:
120º F (58ºC)
READY MIX COLORS
SIK250-005 Natural Oak
SIK250-009 Dark Oak
SIK250-045 Mahogany
SIK250-072 Butternut
SIK250-077 Cedar
SIK250-078 Natural
SIK250-085 Teak
SIK250-089 Redwood