Use and Care Manual

SPECIFICATION DATA
DESCRIPTION
FEATURES
• High-solids alkyd-oil formula, one-coat
application
• High-transparency transoxide pigments
amplify depth of color, clarity and substrate
protection
• Excellent penetration for long-lasting
protection and longer-lasting color
• Powerful UV absorbers protect color and
wood substrate
• Water-repellent
• Provides a mildew-resistant finish
Clean
-
up Solvent:
Mineral Spirits
Resin:
Alkyd
Density*:
7.25 lbs/gal (0.87 kg/L)
VOC*:
<550 g/L (4.58 lbs/gal)
Solids*:
Volume - 38% +/- 1%
Weight - 43% +/- 1%
Practical Coverage:
On rough and weathered surfaces,
150-250 sq ft/gallon (4-6 m
2
/L).
On smooth surfaces or hardwoods,
300-400 sq ft/gallon (7-10 m
2
/L).
Actual coverage may vary depending on the
type, age and texture of the wood and
application method.
Dry Time 77°F (25°C) & 50% RH:
To touch - 12 hours
To light foot traffic - 24-48 hours
Wait 72 hours before replacing furniture. Low
temperature, high humidity or poor ventilation
will increase these times. Avoid heavy
abrasions immediately following application
Shelf Life:
5 years maximum - unopened
Disposal:
Contact your local environmental regulatory agency
for guidance on disposal of unused product. Do not
pour down a drain or storm sewer.
*Data may vary with product color.
Trans
parent
Matte
Cetol
®
SRD Wood Finish
SIK240
Cetol SRD Wood Finish is transparent matte
finishes for siding, rails and decks. Available in
a curated palette of eight richly-saturated wood
tones.
Read Label and Material Safety Data Sheet Prior to Use. See other cautions on last page.
SHIPPING
FREIGHT CLASSIFICATION:
Paint, Combustible Liquid, PGIII
PACKAGING:
1 gallon (3.785 L)
5 gallons (18.925 L)
FLASH POINT:
115º F (46º C)
READY MIX COLORS
SIK240-005 Natural Oak
SIK240-009 Dark Oak
SIK240-045 Mahogany
SIK240-072 Butternut
SIK240-077 Cedar
SIK240-078 Natural
SIK240-085 Teak
SIK240-089 Redwood